стирание:

Дим@ · 14.11.2012, 17:08

такая же проблема- после понижения прошивки не включается ни с анна ни с бэль, все бэкапы есть, но не помогают.

стирание:

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

User ACCEPTED FULL ERASE
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:03

Seek file for this phone....

- > Backup for phone found and it is Ok

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : A777258432D3E9101D6160DBAC2702FCC602E752

Reading NPC certificate...
IMEI : 356257049694397
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\356257049694397_CRT_2nd.rpl

ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x3FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:03

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

прошивка sw 25:

Core : v1.53 , FlashEngine : v1.9

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-707_025.007_79.92_prd.core.fpsx
PPM : RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-707_025.007_00.01_79.92_prd.rofs3.fpsx
CNT : RM-707_025.007_U01.01_79.92.uda.fpsx
APE : rm707_APEONLYENO_11w44v0.003.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing RM-707_025.007_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-707_025.007_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 504 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [PPM]===
Erase : Processing RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 194 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-707_025.007_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-707_025.007_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [CNT]===
Erase : Processing RM-707_025.007_U01.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-707_025.007_U01.01_79.92.uda.fpsx
Total writen 525 blocks
TIME : Write time : 00:00:23
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [APE]===
Erase : Processing rm707_APEONLYENO_11w44v0.003.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm707_APEONLYENO_11w44v0.003.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:55
Reboot phone now...

local mode нет

запись rpl:

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:03

Seek file for this phone....
-----------------------------
- > RPL file found for this phone!
- > NPC Found in : 356257049694397.rpl
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
-----------------------------

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : A777258432D3E9101D6160DBAC2702FCC602E752
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
- > Phone not found...

- > CertWrite failed : phone was not bootup
- > Connection/SW/HW problem, try bootup manually
- > If phone bootup Ok - write only flex keys

Connect phone on selected interface...

14.11.2012, 17:08	#27
Дим@ Member Регистрация: 14.11.2012 Сообщений: 36 Вес репутации: 18	Re: Nokia X7 RM-659 не включается после прошивки RM-707 такая же проблема- после понижения прошивки не включается ни с анна ни с бэль, все бэкапы есть, но не помогают. стирание: Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok User ACCEPTED FULL ERASE Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 006000EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:03 Seek file for this phone.... - > Backup for phone found and it is Ok Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : A777258432D3E9101D6160DBAC2702FCC602E752 Reading NPC certificate... IMEI : 356257049694397 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\356257049694397_CRT_2nd.rpl ADL: Preparing for erase... Full Erase started... Asic : CMT , Sub : NAND Erase Area 0x00000000-0x3FFFFFFF Erasing Ok , [0F] Erase done , time : 00:00:03 ADL: Erase done ADL: Close_Session Content: 000205000000000000FFFF00000000 ADL: Reboot Phone disconected! Connect phone on selected interface... прошивка sw 25: Core : v1.53 , FlashEngine : v1.9 Selected FlashSettings : Cold Flash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-707_025.007_79.92_prd.core.fpsx PPM : RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx PPM2 : RM-707_025.007_00.01_79.92_prd.rofs3.fpsx CNT : RM-707_025.007_U01.01_79.92.uda.fpsx APE : rm707_APEONLYENO_11w44v0.003.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 006000EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL: Check mode Select ASIC [C900] PAPUBkeys : blank (Erased or HW failure) ADL: phone is in flash mode ===Flashing [MCU]=== Erase : Processing RM-707_025.007_79.92_prd.core.fpsx Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:02 Write : Processing RM-707_025.007_79.92_prd.core.fpsx CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [SOS+PMML] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [SOSUPDAPP] CMT: Writing Hash CERT [SOSDSP0] CMT: Writing Hash CERT [LDSP] CMT: Writing Hash CERT [SOSISASW] CMT: Writing Hash CERT [SOS+CORE] CMT: Writing Hash CERT [SOS+ROFS1] Total writen 504 blocks TIME : Write time : 00:00:18 MCU Write done ADL: Request programm status NAND status : 00000002 / 00000002 / 00000000 ===Flashing [PPM]=== Erase : Processing RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing RM-707_025.007_04.01_Russian_79.92_prd.rofs2.fpsx CMT: Writing Hash CERT [SOS+ROFS2] Total writen 194 blocks TIME : Write time : 00:00:07 PPM Write done ADL: Request programm status NAND status : 00000002 / 00000002 / 00000000 ===Flashing [PPM2]=== Erase : Processing RM-707_025.007_00.01_79.92_prd.rofs3.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing RM-707_025.007_00.01_79.92_prd.rofs3.fpsx CMT: Writing Hash CERT [SOS+ROFS3] Total writen 2 blocks TIME : Write time : 00:00:00 PPM Write done ADL: Request programm status NAND status : 00000002 / 00000002 / 00000000 ===Flashing [CNT]=== Erase : Processing RM-707_025.007_U01.01_79.92.uda.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing RM-707_025.007_U01.01_79.92.uda.fpsx Total writen 525 blocks TIME : Write time : 00:00:23 CNT Write done ADL: Request programm status NAND status : 00000002 / 00000002 / 00000000 ===Flashing [APE]=== Erase : Processing rm707_APEONLYENO_11w44v0.003.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm707_APEONLYENO_11w44v0.003.fpsx CMT: Writing Hash CERT [SOSENO] Total writen 20 blocks TIME : Write time : 00:00:00 APE Write done ADL: Request programm status NAND status : 00000002 / 00000002 / 00000000 ADL: Close_Session Content: 000300000000020000000200000000 ADL: Reboot Flashing done! Total flash time : 00:00:55 Reboot phone now... local mode нет запись rpl: Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 24300207B9D8034460936F39DBDF76565C606B35 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 006000EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:03 Seek file for this phone.... ----------------------------- - > RPL file found for this phone! - > NPC Found in : 356257049694397.rpl Check RPL file... NPC Data found! (CMT) CCC Data found! (CMT) HWC Data found! (CMT) SimLock Data found! SimLock key found! WMDRM key found! ----------------------------- Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : A777258432D3E9101D6160DBAC2702FCC602E752 ADL: Preparing for write certificates... Erase NPC... Ok Writing NPC... Ok Erase CCC... Ok Writing CCC... Ok Erase HWC... Ok Writing HWC... Ok ADL: Writing Flash certs done! ADL: Close_Session Content: 000300000000020000000200000000 ADL: Reboot Wait, reconneting... - > Phone not found... - > CertWrite failed : phone was not bootup - > Connection/SW/HW problem, try bootup manually - > If phone bootup Ok - write only flex keys Connect phone on selected interface...