Лог:
Initializing FBUS...
All initialized - Ready to work
[Nokia C7-00 USB Phonet]: Port opened OK!
MCU Version V 92PS1_10w36.2
MCU Date 14-09-10
Product RM-675 (Nokia C7-00)
Manufacturer (c) Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452301F2000000
PSN 0
PSD 0000000000000000
LPSN 0
APE SW 012.003
APE Variant 012.003.00.01012.003.04.01012.003.00.01
APE HW 256
APE ADSP 256
APE BT HCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1920.
RETU 40
TAHVO 00
AHNE 11
RFIC |Alli_4.3.4
DSP TB92PS1_10w36
Failed to read info -> Failed to read SP info
Started Phone Security Analysis...
[Nokia C7-00 USB Phonet]: Port opened OK!
MCU Version V 92PS1_10w36.2
MCU Date 14-09-10
Product RM-675 (Nokia C7-00)
Manufacturer (c) Nokia
IMEI 12345610654321?
Reading Security Block...
Security block OK and saved to "RM-675_12345610654321_27.04.2015_201120.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"2D90010AFAD803444920E4A76F49D745E747C306.C00079A0" Exists, That is good...
Checking SUPERDONGLE...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!
[Nokia C7-00 USB Phonet]: Port opened OK!
Selftests to proceed: 27
Passed ST_SLEEP_X_LOOP_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_KELVIN_BATVOLTAGE_TEST
Passed ST_KELVIN_VIBRA_TEST
Passed ST_KELVIN_CAPACITOR_TEST
Passed ST_KELVIN_MISC_TEST
Passed ST_KELVIN_AUDIO_TEST
Passed ST_KELVIN_XEAR_TEST
Passed ST_USB_CHARGING_TEST
Passed ST_DIGIMIC_TEST
Passed ST_LED_CONTROLLER_TEST
Passed ST_AUDIO_PLL_TEST
Failed ST_CDSP_SLEEPCLOCK_FREQ_TEST
Failed ST_CDSP_RF_BB_IF_TEST
Failed ST_CDSP_STROBE_TEST
Failed ST_CDSP_DIGI_RXTX_IF_TEST
Failed ST_CDSP_RF_SUPPLY_TEST
Failed ST_CDSP_PA_ID_PIN_TEST
Failed ST_CDSP_WCDMA_TX_POWER_TEST
Selftests done, Tests total: 27, Tests passed: 20, Tests not passed: 7
Skipping RPL decryption...
Parsing decrypted RPL...
Processing FBUS Part...
[Nokia C7-00 USB Phonet]: Port opened OK!
Processing FLASHBUS Part...
Booting CMT...
[Nokia C7-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 2D90010AFAD803444920E4A76F49D745E747C306
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006800000131, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0068 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
APE Subsystem Not Found
CMT NPC Erased
CMT NPC Written
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to read info -> Phone not detected
После стирания и прошивки старой версии загружается.После RPL "Contact the retailer"