[UO5OQ]

История обновлений Omnius для Samsung

Использование программы Omnius for Samsung - абсолютно бесплатное = FREE. Нужен только лишь аккаунт на Omnius server.

Omnius for Samsung Version 0.01 (16th March 2011)

• Initial release, preview only
• Parallel phone operations are possible
• Support for the BCM2133 phone platform (S5230)
• Flash BCM2133 phone firmware
• Repair damaged BCM2133 boot sector
• Backup BCM2133 calibration data and security zone
• Restore BCM2133 calibration data
• The following boxes are supported: Fighter, Cruiser, UC10, UC20
• The following boxes are supported: Furious Gold, Infinity, Rocker, Vygis, Z3X
• Prolific PL2303 and Silicon Labs CP210x based cables are supported

Использование программы Omnius for Samsung - абсолютно бесплатное = FREE. Нужен только лишь аккаунт на Omnius server.


Omnius for Samsung v0.02 (11th April 2011)

• Added support for reporting errors directly to the server (Report / Find solution to the problem)
• User interface slightly changed
• Corrected minor issue with detecting device driver versions
• Some communication errors were not reported properly
• Invalid username/password were not reported properly
• Translation fixes

Omnius for Samsung v0.03 (13th May 2011)

• Added support for non-jtag repairing Micron-based S5230 phones with damaged boot sector
• Action logs are automatically saved now
• The procedure is as follows:

1. Run Omnius for Samsung version 0.03 or later
2. Select S5230 as the phone type
3. Click Advanced
4. Select the action Enter mode for repair
5. Select proper connection method and click OK
6. Follow Instructions from the action window
7. Pay attention to the yellow bar that will appear
8. The application will connect to the server and after few moments your phone should display "OMNIUS MODE FOR REPAIR"
9. Disconnect phone from the cable, leave battery in the phone
10. Phone is now in flash mode and will allow flashing original S5230 flash files via ordinary USB cable
11. Now just reflash your phone with proper (compatible) firmware

Omnius for Samsung v0.05 (9th November 2011)

• Added network unlocking of the Hummingbird (S5PC110) phones with Bada operating system (S8530)
• Added network unlocking of the BCM2133 phone platform (S5230)
• Added flashing of Hummingbird phones with Bada OS (S8530)
• Added flashing of S5830 Galaxy Ace
• Added user code (phone code and SIM lock code) reading and resetting for BCM2133 phone platform (S5230)
• Added user code (phone code and SIM lock code) reading and resetting for Hummingbird phones with Bada OS (S8530)
• Added "Send info" operation to help us in developing next features (S8530 and S5230)

Omnius for Samsung v0.06 (23rd November 2011)

• Added network unlocking of Samsung MSM7227 platform based phones with Android operating system (Samsung Galaxy Ace/S5830, etc.)
• Fixed incorrect message when resetting user phone code

Omnius for Samsung v0.07 (28th November 2011)

• Added support for more MSM7227 phone models: Galaxy Gio, Galaxy Mini, Galaxy Fit, Galaxy 551, ...
  Network unlock supported.

Omnius for Samsung v0.09 (16th December 2011)

• Added support for reading network-unlock codes from BCM2133 phones (S5230 Star, S5233, S5630,...) via USB cable
• Added experimental support for reading network-unlock codes from *older* Exynos 4210 phones (i9100 Galaxy S II) via USB cable

Omnius for Samsung v0.10 (19th December 2011)

• Fixed an issue with reading codes from BCM2133 phones via USB data cable

Скачать самую свежую версию Omnius for Samsung >>>