[chabrus]

Павел, очень тупит интернет, и не получается скачать указанный Вами инсталлер прошивки.
Но пока что провел пару экспериментов по данному телу, результаты которого выложил на соседнем форуме, в аналогичной теме. Правда там Вы уже все прочитали, но выложу и сюда. Может кому то поможет в будущем.

Появилась свободная минутка, начнем с начала на этот раз используя интерфейс USB.

Стирание аппарата

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

CFL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x07FFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01
- > USE "COLD FLASH" option in FlashSetting for revive device by USB!!!

CFL: Erase done

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
Phone disconected!

Connect phone on selected interface...

Прошивка

Core version : 1.36 Rev : 1.3

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm243_07.20_prd_core.fpsx
PPM : rm243_07.20_prd_vB05_01_russian.fpsx
CNT : rm243_ENO_A_2009wk15v0.100.fpsx
APE : rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)


CFL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm243_07.20_prd_core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x0087FFFF , CMT , NAND
Erase area : 0x00B80000 - 0x04DFFFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing rm243_07.20_prd_core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS*CORE]
CMT: Writing Hash CERT [SOS+ROFS]
Total writen 349 blocks
TIME : Write time : 00:11:57
MCU Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000


===Flashing [PPM]===
Erase : Processing rm243_07.20_prd_vB05_01_russian.fpsx
Erasing....
Erasing Data....
Erase area : 0x03300000 - 0x04DFFFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing rm243_07.20_prd_vB05_01_russian.fpsx
CMT: Writing Hash CERT [SOS+ROFX]
Total writen 192 blocks
TIME : Write time : 00:06:53
PPM Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000


===Flashing [CNT]===
Erase : Processing rm243_ENO_A_2009wk15v0.100.fpsx
Erasing....
Erasing Data....
Erase area : 0x00880000 - 0x00B7FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing rm243_ENO_A_2009wk15v0.100.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 13 blocks
TIME : Write time : 00:00:24
CNT Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000


===Flashing [APE]===
Erase : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Erasing....
Erasing Data....
Erase area : 0x04E00000 - 0x07B3FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Total writen 1 blocks
TIME : Write time : 00:00:02
APE Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

Flashing done!
Total flash time : 00:19:20
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6120
Software Info: V 07.20 05-10-09 RM-243 (c) Nokia
IMEI: 12345610654321?
Ape Version: 07.20
Product code:
Checking...
SimLock status : Can't get status
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Done!

Elapsed: 00:19:53
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

После чего получаем работающий аппарат.
Вот его check.

Checking StartUp data ...
-----------------------

IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL


SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Восстанавливаем Imei

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Check

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok

Security status : Security Damaged!!!!! :(
 - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Теперь телефон не включается.
Висит на start up filed.

RD Key

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
Fetching data, wait...

- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

Wait, reconneting...

rap= 15000101E47D0058F37E90230F88DCC677278E32
hash= CAEEBB65D3C48E6DC73B49DC5063A2EE
key= FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Key file updated...

Done!

Repair SD

Repair SD procedure started...

Phone Imei: 358641013951339
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key...   Error
Repair fail...!

Restore CCC/HWC

Will Write CCC/HWC keys now...

Using : RM-243.rpl
CCC Data found!
HWC Data found!

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

CFL: Preparing for write certificates...

Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

CFL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
All done, disconneting...

Done!

Elapsed: 00:00:13

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Из спортивного интереса, пробую пролить Sim Lock

Repair SL procedure started...

Phone Imei: 358641013951339
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data...   Ok!
Writing SimLock Key...   Ok!
Done!

Но SD Best в этот телефон пролить так и не может. ни по USB ни через Fbus

Repair SD procedure started...

Phone Imei: 358641013951339
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key...   Error
Repair fail...!

В то время как МХкеу справляется с этой задачей.
[OFF](В данный момент совсем его не использую, чтобы полностью проверить возможности Best на данном ТА)[/OFF]

На данный момент, состояние телефона таково:

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Info

Reading Phone Info....
Connected phone - Nokia 6120
Software ver : V 07.20 05-10-09 RM-243 (c) Nokia
IMEI : 358641013951339
Ape Ver : 07.20
APE Var : Vr RUSSIAN 01-12-06 RM-243
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.3_rm243
APE Test: rm243_ENO_A_2009wk15v0.100
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 3805 mV
Camera:
CMT BT:
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 358641013951339
IMEI spNet : 3A 85 46 01 31 59 31 03
IMEI svNet : 33 85 46 01 31 59 31 63 F0

Unable to read Lock table...
CRT308 Backup Created

SDD key status : Damaged!!!!!
SimLock status : Ok
Security status : Ok
PA_SL phone

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Но теперь он запускается и работает. Конечно же не более 5 минут.
получается что мне удалось его вернуть в то состояние, в котором его ко мне принесли.

Теперь:

Стираем RPL

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

ADL: Preparing for erase certificates...

Erase NPC... Ok
Erase CCC... Ok
Erase HWC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Получаем такую картину:

Checking StartUp data ...
-----------------------

IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL


SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Заливаем Repair RPL приготовленный Павлом uo5oq

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
CMLA key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
Wait, reconneting...

Writing SimLock Data... Ok!
Writing SimLock Key... Ok!

SDD Key status : SDData Damaged!!!!!
SimLock status : Can't get status
Security status : Security Damaged!!!!!

CMLA key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Получается такая картина:

Checking StartUp data ...
-----------------------

IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL


SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok

Security status : Security Damaged!!!!! :(
 - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

Значит, Repair RPL получился не совсем удачным
НО, обратил внимание на следующую деталь: там присутствуют CLMA сертификаты, а именно те, которых не доставало в моих бекапах.

Исходя из своего скромного опыта работы с сертификатами, решил удалить только NPC часть из полученного от Павла RPL и влить родной для востановления imei

Стирание

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)

ADL: Preparing for erase certificates...

Erase NPC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
Connect phone on selected interface...

Заливка родного NPC

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15000101E47D0058F37E90230F88DCC677278E32
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 0FE1BA92D924A658E4800780FA6F4868100AC947

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

На выходе получаем

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL phone detected

Done!

И опять таки

Repair SD procedure started...

Phone Imei: 358641013951339
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key...   Error
Repair fail...!

мысли закончились. Очень тупит интернет, и я второй час пытаюсь скачать файл следуя инструкции из этого поста

По результатам отпишусь.

ЗЫ: телефон включается и работает, а не висит как прежде на start up filed.

По выложенной Вами инсттрукции попробую поработать завтра. О результате отпишусь.
Прошу пересмотреть выложенный Вами Repair rpl, поскольку как уже видно, с ним не восстановился серийный номер аппарата.