Помощь нашим пользователям в восстановлении ПО Nokia BB5 с помощью RPL

[Mixa100]

Здравствуйте. Телефон Nokia 6303ci RM-638 contact service.
вот BUS Check MxKey:

Скрытый текст

MXKEY
Using device: USB Phonet
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: nmwcdc, ver: 7.1.32.75
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
Phone type: RM-638 (Nokia 6303i Classic)
Product code: 0598977
SW version: V 10.80 - 21-01-11 - RM-638 - (c) Nokia
LanguagePkg version: 0 - 21-01-11 - RM-638 - (c) Nokia - I
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
CMT SYSTEM ASIC ID: 000000010000022600000001020C192102054100 [RAPS2 ver: PA 4.x]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 2DD00019EC030049478FA960FC56E7EE6C905794
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID: 67E82268F29CEA60
Loading CMT secondary boot code
SecondaryBoot: RAP3Gv40_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3AC0
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0030 - 0000 0321 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAP3Gv40_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0x91BD2
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 13051B0C
FUR: Adding Asic CMT as client OK.
CMT PAPUBKEYS HASH: 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
Original Imei: 35268204661092
Original Product code: 0598977
Bluetooth ID: A04E048067F7
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).

Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia 6303i classic USB Phonet, PORT_ID: 88DBE1D
Verifying communication to device OK.

Phone type: RM-638 (Nokia 6303i classic)
SW version: V 10.80 21-01-11 RM-638 (c) Nokia
Imei plain: 35268204661092-8
Product code: 0598977
Battery voltage: 3709 mV, current: 142 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)
Camera config: NI00IIIIRR0300000000, ver: XXX.XXX
warning: DCC corrupted !

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST failed!
SECURITY_TEST passed


SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
Market items is empty, please select the correct products path !

поможет только RPL?

[UO5OQ]

SIMLOCK_TEST failed!
SECURITY_TEST passed
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

Да, только заказ RPL

[Mixa100]

Здравствуйте. Подскажите как сделать полный сброс через MxKey чтоб проверить действительно нужен RPL или может проблема по железу?

[se13]

Сообщение от Mixa100

Здравствуйте. Подскажите как сделать полный сброс через MxKey чтоб проверить действительно нужен RPL или может проблема по железу?

А что у вас не работает?

[UO5OQ]

Сообщение от Mixa100

Здравствуйте. Подскажите как сделать полный сброс через MxKey чтоб проверить действительно нужен RPL или может проблема по железу?

Ответ на ваш вопрос есть в этом же разделе нашего Форума, вот ТУТ:
Как проверить работоспособность железа телефона Nokia перед заказом RPL

[Vanillaman]

Заказал у Вас RPL файл, программатор Cyclone-Box, Nokia E52
После всего проделанного телефон включается, загорается надпись Nokia и все, телефон выключается, высылаю текстовый файл с последовательностью моих действий

[UO5OQ]

Сообщение от Vanillaman

Заказал у Вас RPL файл, программатор Cyclone-Box, Nokia E52
После всего проделанного телефон включается, загорается надпись Nokia и все, телефон выключается, высылаю текстовый файл с последовательностью моих действий

Полностью сотрите телефон и запишите только SW (простая прошвика).
В таком виде, исправный аппаратно телефон Nokia, обязан полностью включиться с IMEI 123456... и работать несколько минут.
Так у вас?

[Vanillaman]

Сообщение от UO5OQ

Полностью сотрите телефон и запишите только SW (простая прошвика).
В таком виде, исправный аппаратно телефон Nokia, обязан полностью включиться с IMEI 123456... и работать несколько минут.
Так у вас?

Да он включается с таким имеем, работает какое-то время, потом перезагружается, сейчас еще раз попробую,
прошил этой прошивкой, тоже самое
Nokia E52 RM-469 Gr Rus sw 091.003.exe

[UO5OQ]

Сообщение от Vanillaman

Да он включается с таким имеем, работает какое-то время, потом перезагружается, сейчас еще раз попробую,
прошил этой прошивкой, тоже самое
Nokia E52 RM-469 Gr Rus sw 091.003.exe

Значит на 99,9% можно сказать, что железо в порядке.
В таком виде телефон переводится в Local mode?

[Vanillaman]

Сообщение от UO5OQ

Значит на 99,9% можно сказать, что железо в порядке.
В таком виде телефон переводится в Local mode?

да,после полного стирания и записи последней прошивки, телефон включается и работает, когда начинаю заливать RPL, потом PM, дальше телефон должен включиться, а в моем случае дальше заставки дело не доходит

[UO5OQ]

Сделайте так:
- Полное стирание Flash + стирание PM
- Запись прошивки версии постарее (средней, не самой новой). Желательно из полного заводского Installer или скачанной с помощью программы Navifirm.
- Запись только RPL по F-BUS кабелю
Покажите лог этих операций и опишите состояние телефона после них.

[Vanillaman]

Сообщение от UO5OQ

Сделайте так:
- Полное стирание Flash + стирание PM
- Запись прошивки версии постарее (средней, не самой новой). Желательно из полного заводского Installer или скачанной с помощью программы Navifirm.
- Запись только RPL по F-BUS кабелю
Покажите лог этих операций и опишите состояние телефона после них.

Спасибо, все сделал, все получилось))))))

[UO5OQ]

Сообщение от Vanillaman

Спасибо, все сделал, все получилось))))))

а PM c SX4 записали ?
Security Test Failed нету в логе INFO ?

[Vanillaman]

Сообщение от UO5OQ

а PM c SX4 записали ?
Security Test Failed нету в логе INFO ?

сделал на прошивке 52.3, имей востановился, телефон включился, решил обновить до последней прошивки 91.3 и снова, надпись Nokia и телефон тухнет

[UO5OQ]

Сообщение от Vanillaman

сделал на прошивке 52.3, имей востановился, телефон включился, решил обновить до последней прошивки 91.3 и снова, надпись Nokia и телефон тухнет

Возможно файлы прошивки 91.3 битые.
А RM прошивки 91.3 совпадает с RM прошивки 52.3 и с RM телефона указанного на стикере телефона?
Nokia E52 бывает RM-469 (как ваша) и бывает RM-481

[Vanillaman]

Сообщение от UO5OQ

Возможно файлы прошивки 91.3 битые.
А RM прошивки 91.3 совпадает с RM прошивки 52.3 и с RM телефона указанного на стикере телефона?
Nokia E52 бывает RM-469 (как ваша) и бывает RM-481

Спасибо Вам за помощь, все работает, восстановился на прошивку 052.003, к сожалению кроме Cyclona Boxa нету другова программатора, экспериментировать с поднятием прошивки не стал, телефон работает нормально))))

[bargeman]

Доброго времени суток.
Сталкивался много раз с слетевшими сертификатами, но не связывался с их восстановлением - отсылал в другой сц. Но тут мне принесли Е52 не заряжающийся - заменил питание - стал трупом, реагирует на кнопку включения только виброй и все. На различных площадках прочитал что после перекатки пары, и всего что связано с питанием остается только сделать erase и лить прошу с заказом RPL. Т.к. никогда не лил RPL возникло кучу вопросов:
1. Ask файл - как его считать? DSS - не видит телефон - при подключении аппарата через CA-101 и нажатии вкл ничего не происходит.
2. Из программаторов имеется только UFS и феникс, так же есть MXkey, но его я покупал 3 года назад, и не пользовался - тут решил как -то прошить: узнал что теперь им только DCT-3 шить можно, а для bb5 - нужно теперь докупать MX-box или что-то типа того. Подойдет ли хоть что-то из моего скудного арсенала? В соседнем СЦ есть MT-Box, но он какой-то глючный - считать (по словам мастера) не может пока телефон не в локале... ну а поскольку у меня труп...
в спойлере лог единственного файла что смог выцепить с помощью MT-box'a

355216033543474.pm

YSTEM_ASIC_ID( RAP ):
000000030000022600010007600C192102011104
EM_ASIC_ID( RAP ):
00000C35
EM_ASIC_ID( RAP ):
00000C30
PUBLIC_ID( RAP ):
02E00105005F0344591CC2777CF4E2B374D8B3F4
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
25B977A055BE9B5DEC0C38A2A279C695
ROM_ID( RAP ):
3E273BF637BE26FA

Буду оч. признателен любым советам по восстановление RPL

[UO5OQ]

Сообщение от bargeman

...Буду оч. признателен любым советам по восстановление RPL

Прежде всего прочтите ИНСТРУКЦИЮ >>>
Так же хочу вам сказать, что при замене рабочей пары (процессор+флэшь) с такой же модели телефона - заказ RPL не требуется.

[Cik]

Добрый день, получится восстановить симлок на данном телефоне
Nokia E52 RM 469
При включении просто вибрирует, пробовали прошить не помогло вытащил только RPL вот лог

[SPOILER]

15:35:56 : SearchForBootstrap_DCT5..
15:35:56 : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_2nd.fg
15:35:56 : Boot File - Version 012.014.00
15:35:56 : Boot File - Revision 0x0003 (3)
15:35:56 : eBB5ProtocolType == New
15:35:56 : PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
15:35:56 : PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
15:35:56 : SearchForBootstrap_DCT5 : No Error - 0 (0x00)
15:35:56 : Secondary Loader Sent...
15:35:56 : TransmissionTypeRequest_DCT5_NewProtocol
15:35:56 : TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
15:35:56 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
15:35:56 : TransmissionTypeRequest_DCT5_NewProtocol
15:35:56 : FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
15:35:56 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
15:35:56 : Transmission Type Request Sent...
15:35:56 : ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
15:35:56 : MCU_CONFIGURATION_RESPONSE_BB5:
15:35:56 : MessageID : 06
15:35:56 : SubBlocks : 06
15:35:56 : 1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:35:56 : Block Length : 0B
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Device Type : RAM 05
15:35:56 : Device Index : 00
15:35:56 : Manufacturer Code : 0000 -> Flash
15:35:56 : Device ID : 0000 -> not detected
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0000
15:35:56 : 2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:35:56 : Block Length : 0B
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Device Type : MMC 04
15:35:56 : Device Index : 00
15:35:56 : Manufacturer Code : FFFF -> Flash
15:35:56 : Device ID : 0000 -> BAD FLASH TYPE
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0000
15:35:56 : 3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:35:56 : Block Length : 0B
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Device Type : NOR 00
15:35:56 : Device Index : 00
15:35:56 : Manufacturer Code : 0020 ->
15:35:56 : Device ID : 0040 -> Type not in database
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0031
15:35:56 : 4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:35:56 : Block Length : 0B
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Device Type : NOR 00
15:35:56 : Device Index : 01
15:35:56 : Manufacturer Code : 0000 -> SPANSION
15:35:56 : Device ID : 0001 -> not used
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0000
15:35:56 : 5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:35:56 : Block Length : 0B
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Device Type : MuxOneNAND 03
15:35:56 : Device Index : 00
15:35:56 : Manufacturer Code : 0020 ->
15:35:56 : Device ID : 0040 -> Type not in database
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0031
15:35:56 : 6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
15:35:56 : Block Length : 09
15:35:56 : BB ASIC Index : CMT 00
15:35:56 : Data : XSR 1.6
15:35:56 : Checksum : 54
15:35:56 : SearchForBootstrap_DCT5 : No Error - 0 (0x00)
15:35:56 : FLS1SendAlgoCodeEx..
15:35:56 : SendAlgoCode_DCT5..
15:35:56 : SearchForAlgorithm_DCT5..
15:35:56 : Looking for ALL Devices...
15:35:56 : Searching Algorithm Files MuxOneNAND (03) ManID :0020 DevID :0040 ExtID :0000 RevID :0031
15:35:56 : Flash Descriptor
15:35:56 : Manufacturer Code : 0020
15:35:56 : Device ID : 0040
15:35:56 : Extended/Fixed ID : 0000
15:35:56 : Revision ID : 0000
15:35:56 : Size : 10000000 (256 MB)
15:35:56 : VPP Info : 0000
15:35:56 : Erase10s : 1E
15:35:56 : Block1s : 32
15:35:56 : BErase1s : 02
15:35:56 : Reserved0 : 00
15:35:56 : Reserved1 : 00
15:35:56 : Reserved2 : 00
15:35:56 : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_XSR17_alg.fg
15:35:56 : Algorithm File - Version 012.014.00
15:35:56 : Algorithm File - Revision 0x0003 (3)
15:35:56 : eBB5ProtocolType == New
15:35:57 : Algo Loader Sent...
15:35:57 : SendCodeStart_NewProtocol :
15:35:58 : SendCodeStart_NewProtocol_DCT5 : No Error - 0 (0x00)
15:35:58 : TransmissionTypeRequest_DCT5_NewProtocol
15:35:58 : TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
15:35:58 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
15:35:58 : TransmissionTypeRequest_DCT5_NewProtocol
15:35:58 : FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
15:35:58 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
15:35:58 : SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
15:35:58 : FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
15:35:58 : FUR control Ok...
15:35:58 : VPP Enabled by Software
15:35:58 : Using Internal VPP
15:35:58 : VPP Enabled by Software
15:35:58 : FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
15:35:58 : PAPUB_KEYS_HASH_REQ_BB5
15:35:58 : PhoneInfoRequest_BB5 (Asic Index 00 )
15:35:58 : PHONE_INFO_RESPONSE_BB5
15:35:58 : PAPUB_KEYS_HASH_RESP_BB5 2A
15:35:58 : BB Asic Index : 00
15:35:58 : CMT PAPUBKEYS HASH:
15:35:58 : 85F252E351E225CAFC4DFBC8041EABD2823E3500
15:35:58 :
15:36:09 : ===========================================
15:36:09 : PHONE FIRMWARE VERSION:
15:36:09 : 091.003
15:36:09 : ===========================================
15:36:09 :
15:36:09 :
15:36:09 : Scanning Simlock Applet Type...
15:36:14 : OK
15:36:14 :
15:36:14 : =================================================
15:36:14 : PA_SIMLOC30 Applet detected
15:36:14 : Use "Scan Phone" Button to Check if this Phone
15:36:14 : uses a 15-digit NCK or a 20-digit NCK...
15:36:14 : =================================================
15:36:14 :
15:36:14 : * Firmware Version Downgrade will KILL PHONE !!!
15:36:14 : * Manual Full Erase WILL KILL PHONE!!!
15:36:14 : * Simlocks are in PM 120 Only...
15:36:14 : * PM 308 is Write Protected...
15:36:14 :
15:36:19 :
15:36:30 : Forcing Test Mode via BUSCHECK...
15:36:30 : Booting Phone via FBUS...
15:36:30 :
15:36:30 :
15:36:30 : AdvanceBox SendBootCodeEx
15:36:30 : InitialiseBootstrap_DCT5 DIR
15:36:30 : BootFlashMode_DCT5
15:36:30 :
15:36:30 : ******************************************************
15:36:30 : TIME STARTS HERE
15:36:30 : ******************************************************
15:36:30 :
15:36:30 : BootFlashModeDCT5Ex Succeeded First Time
15:36:30 : SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
15:36:30 : Number of Sub Blocks 7 (0x07)
15:36:30 : 1 SYSTEM_ASIC_ID 01
15:36:30 : Block Length : 21 (15)
15:36:30 : BB ASIC Index : 0 (00) CMT
15:36:30 : ID DWORD 0 : 00000003
15:36:30 : ID DWORD 1 : 00000226
15:36:30 : ID DWORD 2 : 00010007
15:36:30 : ID DWORD 3 : 600C1921
15:36:30 : ID DWORD 4 : 02011104
15:36:30 : 2 EM_ASIC_ID 02
15:36:30 : Block Length : 5 (05)
15:36:30 : BB ASIC Index : 0 (00) CMT
15:36:30 : ID DWORD 0 : 00001040
15:36:30 : 3 EM_ASIC_ID 02
15:36:30 : Block Length : 5 (05)
15:36:30 : BB ASIC Index : 0 (00) CMT
15:36:30 : ID DWORD 0 : 00001030
15:36:30 : 4 PUBLIC_ID 12
15:36:31 : Block Length : 21 (15)
15:36:31 : BB ASIC Index : 0 (00) CMT
15:36:31 : ID DWORD 0 : 19900214
15:36:31 : ID DWORD 1 : 075D0344
15:36:31 : ID DWORD 2 : 34C52472
15:36:31 : ID DWORD 3 : 20531ACD
15:36:31 : ID DWORD 4 : 46FEB6FE
15:36:31 : 5 ASIC_MODE_ID 13
15:36:31 : Block Length : 2 (02)
15:36:31 : BB ASIC Index : 0 (00) CMT
15:36:31 : Mode Id : 00
15:36:31 : 6 ROOT_KEY_HASH 14
15:36:31 : Block Length : 17 (11)
15:36:31 : BB ASIC Index : 0 (00) CMT
15:36:31 : Hash : 25 B9 77 A0 55 BE 9B 5D EC 0C 38 A2 A2 79 C6 95
15:36:31 : 7 ROM_ID 15
15:36:31 : Block Length : 9 (09)
15:36:31 : BB ASIC Index : 0 (00) CMT
15:36:31 : CRC 0 : 3E273BF6
15:36:31 : CRC 1 : 37BE26FA
15:36:31 : Checksum 96
15:36:31 :
15:36:31 : SearchForBootstrap_DCT5..
15:36:31 : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_2nd.fg
15:36:31 : Boot File - Version 012.014.00
15:36:31 : Boot File - Revision 0x0003 (3)
15:36:31 : eBB5ProtocolType == New
15:36:31 : PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
15:36:31 : PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
15:36:31 : SearchForBootstrap_DCT5 : No Error - 0 (0x00)
15:36:31 : Secondary Loader Sent...
15:36:31 : TransmissionTypeRequest_DCT5_NewProtocol
15:36:31 : TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
15:36:31 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
15:36:31 : TransmissionTypeRequest_DCT5_NewProtocol
15:36:31 : FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
15:36:31 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
15:36:31 : Transmission Type Request Sent...
15:36:31 : ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
15:36:31 : MCU_CONFIGURATION_RESPONSE_BB5:
15:36:31 : MessageID : 06
15:36:31 : SubBlocks : 06
15:36:31 : 1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:36:31 : Block Length : 0B
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Device Type : RAM 05
15:36:31 : Device Index : 00
15:36:31 : Manufacturer Code : 0000 -> Flash
15:36:31 : Device ID : 0000 -> not detected
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0000
15:36:31 : 2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:36:31 : Block Length : 0B
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Device Type : MMC 04
15:36:31 : Device Index : 00
15:36:31 : Manufacturer Code : FFFF -> Flash
15:36:31 : Device ID : 0000 -> BAD FLASH TYPE
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0000
15:36:31 : 3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:36:31 : Block Length : 0B
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Device Type : NOR 00
15:36:31 : Device Index : 00
15:36:31 : Manufacturer Code : 0020 ->
15:36:31 : Device ID : 0040 -> Type not in database
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0031
15:36:31 : 4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:36:31 : Block Length : 0B
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Device Type : NOR 00
15:36:31 : Device Index : 01
15:36:31 : Manufacturer Code : 0000 -> SPANSION
15:36:31 : Device ID : 0001 -> not used
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0000
15:36:31 : 5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
15:36:31 : Block Length : 0B
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Device Type : MuxOneNAND 03
15:36:31 : Device Index : 00
15:36:31 : Manufacturer Code : 0020 ->
15:36:31 : Device ID : 0040 -> Type not in database
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0031
15:36:31 : 6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
15:36:31 : Block Length : 09
15:36:31 : BB ASIC Index : CMT 00
15:36:31 : Data : XSR 1.6
15:36:31 : Checksum : 54
15:36:31 : SearchForBootstrap_DCT5 : No Error - 0 (0x00)
15:36:31 : FLS1SendAlgoCodeEx..
15:36:31 : SendAlgoCode_DCT5..
15:36:31 : SearchForAlgorithm_DCT5..
15:36:31 : Looking for ALL Devices...
15:36:31 : Searching Algorithm Files MuxOneNAND (03) ManID :0020 DevID :0040 ExtID :0000 RevID :0031
15:36:31 : Flash Descriptor
15:36:31 : Manufacturer Code : 0020
15:36:31 : Device ID : 0040
15:36:31 : Extended/Fixed ID : 0000
15:36:31 : Revision ID : 0000
15:36:31 : Size : 10000000 (256 MB)
15:36:31 : VPP Info : 0000
15:36:31 : Erase10s : 1E
15:36:31 : Block1s : 32
15:36:31 : BErase1s : 02
15:36:31 : Reserved0 : 00
15:36:31 : Reserved1 : 00
15:36:31 : Reserved2 : 00
15:36:31 : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_XSR17_alg.fg
15:36:31 : Algorithm File - Version 012.014.00
15:36:31 : Algorithm File - Revision 0x0003 (3)
15:36:31 : eBB5ProtocolType == New
15:36:32 : Algo Loader Sent...
15:36:32 : SendCodeStart_NewProtocol :
15:36:33 : SendCodeStart_NewProtocol_DCT5 : No Error - 0 (0x00)
15:36:33 : TransmissionTypeRequest_DCT5_NewProtocol
15:36:33 : TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
15:36:33 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
15:36:33 : TransmissionTypeRequest_DCT5_NewProtocol
15:36:33 : FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
15:36:33 : TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
15:36:33 : SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
15:36:33 : FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
15:36:33 : FUR control Ok...
15:36:33 : VPP Enabled by Software
15:36:33 : Using Internal VPP
15:36:33 : VPP Enabled by Software
15:36:33 : FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
15:36:33 : PAPUB_KEYS_HASH_REQ_BB5
15:36:33 : PhoneInfoRequest_BB5 (Asic Index 00 )
15:36:33 : PHONE_INFO_RESPONSE_BB5
15:36:33 : PAPUB_KEYS_HASH_RESP_BB5 2A
15:36:33 : BB Asic Index : 00
15:36:33 : CMT PAPUBKEYS HASH:
15:36:33 : 85F252E351E225CAFC4DFBC8041EABD2823E3500
15:36:33 :
15:36:35 : ===========================================
15:36:35 : PHONE FIRMWARE VERSION:
15:36:35 : 091.003
15:36:35 : ===========================================
15:36:35 :
15:36:35 :
15:36:35 : Scanning Simlock Applet Type...
15:36:40 : OK
15:36:40 :
15:36:40 : =================================================
15:36:40 : PA_SIMLOC30 Applet detected
15:36:40 : Use "Scan Phone" Button to Check if this Phone
15:36:40 : uses a 15-digit NCK or a 20-digit NCK...
15:36:40 : =================================================
15:36:40 :
15:36:40 : * Firmware Version Downgrade will KILL PHONE !!!
15:36:40 : * Manual Full Erase WILL KILL PHONE!!!
15:36:40 : * Simlocks are in PM 120 Only...
15:36:40 : * PM 308 is Write Protected...
15:36:40 :
15:36:40 :
15:36:40 : Waiting for Phone to Go Online...
15:36:41 : Elapsed Time: 1s
15:36:42 : Elapsed Time: 2s
15:36:43 : Elapsed Time: 3s
15:36:44 : Elapsed Time: 4s
15:36:45 : Elapsed Time: 5s
15:36:46 : Elapsed Time: 6s
15:36:47 : Elapsed Time: 7s
15:36:48 : Elapsed Time: 8s
15:36:49 : Elapsed Time: 9s
15:36:50 : Elapsed Time: 10s
15:36:50 :
15:36:50 : ================================================
15:36:50 : Basic Phone Information
15:36:50 : ================================================

[UO5OQ]

Сообщение от Cik

Добрый день, получится восстановить симлок на данном телефоне
Nokia E52 RM 469
При включении просто вибрирует, пробовали прошить не помогло вытащил только RPL

В приложенном вами бэкапе RPL отсутствует SIM LOCK DATA.
Соответственно, с его помощью, SIM LOCK в телефоне не восстановить.

[Cik]

Сообщение от UO5OQ

В приложенном вами бэкапе RPL отсутствует SIM LOCK DATA.
Соответственно, с его помощью, SIM LOCK в телефоне не восстановить.

А сколько будет стоить заказ RPL?

[UO5OQ]

Сообщение от Cik

А сколько будет стоить заказ RPL?

01.03.2013 |RPL BB5
Восстановлен сервис RPL

[bakhtee]

Здраствуйте Павел. nokia 303 contact service. имею rpl с вашего сервера.
делаю erase flash, прошиваю старую версию прошивку, imei 12345... тел перезагружается, далее заливаю rpl, ужас на экране 303 CONTACT SERVICE!!!

лог программатора best:

connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 059J1F5

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

или rpl именно с fbusом залить??

[UO5OQ]

Сообщение от bakhtee

Здраствуйте Павел. nokia 303 contact service. имею rpl с вашего сервера.
делаю erase flash, прошиваю старую версию прошивку, imei 12345... тел перезагружается, далее заливаю rpl, ужас на экране 303 CONTACT SERVICE!!!

лог программатора best:

connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 059J1F5

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

или rpl именно с fbusом залить??

Здравствуйте.
Скажите пожалуйста, полностью стёртый телефон и после записанный только SW (обычная прошивка) с IMEI 12345... включается полностью и работает хоть пару минут?
Если да, то после записи RPL, когда телефон выдаёт Contact Service - запишите ещё раз SW, и потом PM c SX4.
После покажите логи записи RPL, SW, PM и лог INFO после всех этих операций.

[bakhtee]

после заливки rpl

Log

Connect phone on selected interface...


User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found..
Looks like HW failure / Cable / Battery problem
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO


User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533

Reading NPC certificate...
IMEI : 351969059861097
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351969059861097_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:02

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Transmission type request fail [000000]
-> Boot error...
-> Boot fail...
Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

- > No any CRT data (MCU damaged/CERT erased), skip saving


=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm763__14.38.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm763__14.38.ppm_e1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.ppm_e1
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm763__14.38.image_e1_059J1B9_007
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm763__14.38.image_e1_059J1B9_007
Total writen 354 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.38 27-01-12 RM-763 (c) Nokia
IMEI: 12345610654321?
PPM version : V 14.38 27-01-12 RM-763 (c) Nokia E1
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:45
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 059J1F5

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

[bakhtee]

итог все действии который вы мне написали

Log

User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found..
Looks like HW failure / Cable / Battery problem
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO


User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533

Reading NPC certificate...
IMEI : 351969059861097
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351969059861097_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:02

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Transmission type request fail [000000]
-> Boot error...
-> Boot fail...
Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

- > No any CRT data (MCU damaged/CERT erased), skip saving


=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm763__14.38.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm763__14.38.ppm_e1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.ppm_e1
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm763__14.38.image_e1_059J1B9_007
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm763__14.38.image_e1_059J1B9_007
Total writen 354 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.38 27-01-12 RM-763 (c) Nokia
IMEI: 12345610654321?
PPM version : V 14.38 27-01-12 RM-763 (c) Nokia E1
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:45
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 059J1F5

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 351969059861097
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351969059861097_2nd.rpl


=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm763__14.38.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm763__14.38.ppm_e1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.ppm_e1
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm763__14.38.image_e1_059J1B9_007
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm763__14.38.image_e1_059J1B9_007
Total writen 354 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:15
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.38 27-01-12 RM-763 (c) Nokia
IMEI: 351969059861097
PPM version : V 14.38 27-01-12 RM-763 (c) Nokia E1
Product code: 059J1F5
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:43
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Local SX4 procedure started...

Check SD : Key is Ok
Phone Imei: 351969059861097
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"

видимо сервер не отвечает

[kiv6666]

Сообщение от bakhtee

итог все действии который вы мне написали

Log

User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found..
Looks like HW failure / Cable / Battery problem
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO


User break FULL Erase

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533

Reading NPC certificate...
IMEI : 351969059861097
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351969059861097_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:02

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Transmission type request fail [000000]
-> Boot error...
-> Boot fail...
Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

- > No any CRT data (MCU damaged/CERT erased), skip saving


=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm763__14.38.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm763__14.38.ppm_e1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.ppm_e1
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm763__14.38.image_e1_059J1B9_007
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm763__14.38.image_e1_059J1B9_007
Total writen 354 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.38 27-01-12 RM-763 (c) Nokia
IMEI: 12345610654321?
PPM version : V 14.38 27-01-12 RM-763 (c) Nokia E1
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:45
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 059J1F5

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core : v1.85 , BB5XG FlashEngine : v9.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.38.mcusw
PPM : rm763__14.38.ppm_e1
CNT : rm763__14.38.image_e1_059J1B9_007
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: E04D0000FFFB3C408DC84FC27F80E215B6AA941D
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 351969059861097
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351969059861097_2nd.rpl


=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm763__14.38.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm763__14.38.ppm_e1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.38.ppm_e1
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm763__14.38.image_e1_059J1B9_007
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm763__14.38.image_e1_059J1B9_007
Total writen 354 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:15
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.38 27-01-12 RM-763 (c) Nokia
IMEI: 351969059861097
PPM version : V 14.38 27-01-12 RM-763 (c) Nokia E1
Product code: 059J1F5
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:43
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Local SX4 procedure started...

Check SD : Key is Ok
Phone Imei: 351969059861097
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"

видимо сервер не отвечает

http://www.uo5oq.com/forum/showpost....5&postcount=17

[UO5OQ]

Сообщение от bakhtee

Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351969059861097
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"

видимо сервер не отвечает

Сервер SX4 у BEST не работает. Но локальная SX4 - работает.
IMEI, SIM LOCK у телефона восстановлены.
Очевидно, что Contact service из-за Security status : Security Damaged!!!!! Запишите PM с SX4 и телефон должен заработать.

Сообщение от zorgy_1979

Проблема с записью pm следующая. На данный момент у Вас оригинальный superdongle ибо Вы записали заводской rpl. Поэтому best требует авторизации на сервере sx4, который в дауне. Но обойти проще простого. Сделайте repair sd и после этого best без проблем пройдет локальную авторизацию.

[bakhtee]

извените если что не так делаю best ом я пользуюсь не давно, все равно contact service.
подскажите подробно, какую кнопку нажать чтоб записать pm?
как подсказал уважаемый zorgy_1979, кнопку Repair SSD нажал, не помогает

[bakhtee]

огромный Respect zorgy_1979, и вам Павел, все заработал. УРА УРА УРА

[paha_bb5]

День добрый. столкнусля со странным Е52, RM-469. немалое время назад востонавливал данный аппарат с заказом RPL на сервере. все получилось и работало. прошло полттора года и он снова вернулся с той же неисправностью.
Востановил не один аппарат по программным неисправностям. но этот заставил мня обратится уже сюда на форум. после полного стирания и записи любой SW девайс работает и довольно таки долго. но после записи полного RPL включается, заставка, и уходит в перезагруз. обнаружил, что RPL зашивается не полностью. а именно CLMA зона. при попытке записи этой зоны БЕСТ зависает до тех пор пока не отключишь телефон.
Телефон заходит в тест и локал режим.
при проверке CHECK пишет ошибка SECURITY
отдельно CCC\HWCпрошивается но ошибка не устраняется.

Лог:

Connect phone on selected interface...

Core : v1.99 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm469_052.003_prd.core.fpsx
PPM : rm469_052.003_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : RM469_ENO_09w23v0.a078.01.fpsx
APE : rm469_052.003_U007.000_prd.uda.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2B4001087E8803449BB69BA3B55022D55B5D0DB4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm469_052.003_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 428 blocks
TIME : Write time : 00:00:25
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [PPM]===
Erase : Processing rm469_052.003_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 166 blocks
TIME : Write time : 00:00:10
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [PPM2]===
Erase : Processing rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [CNT]===
Erase : Processing RM469_ENO_09w23v0.a078.01.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM469_ENO_09w23v0.a078.01.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [APE]===
Erase : Processing rm469_052.003_U007.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_U007.000_prd.uda.fpsx
Total writen 15 blocks
TIME : Write time : 00:00:01
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:41
Reboot phone now...

Afterflash not selected, skip
Done!
Phone disconected!

Connect phone on selected interface...


Elapsed: 00:00:52
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
CMLA KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2B4001087E8803449BB69BA3B55022D55B5D0DB4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 85F252E351E225CAFC4DFBC8041EABD2823E3500
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 0578053

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

Write CMLA... Error
WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15

Done!
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15

Done!

[se13]

Для начала попробуйте стереть и прошить (запись RPL) не по USB, а по F-bus кабелю.