N8 "Security status : Damaged!!!!!" - нужен ли RPL ?

[panascan]

Поможет ли RPL, или всё можно сделать локально. Есть BEST, ATF, Cyclon.

вот лог Веst'a:

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1D500014FCDD034471DC04D2EF9437F81A10B8AB
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Reading NPC certificate...
IMEI : 359054049267523
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\359054049267523_CRT_2nd.rpl

Will read flash content now...
Flash IC Size : 512 MB
Read done , 491 MB was readed

FullFlash saved to : 359054049267523_full.bin

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Done!!!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Local SX4 procedure started...

Check SD : Key is Ok
Phone Imei: 359054049267523
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"


Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connection error #1
Server not found...
SX4 Auth error

Repair SD procedure started...

Phone Imei: 359054049267523
Key file exists, no need to read...
Break SdRepReq (on alive SD) by user
Repair fail...!

Phone disconected!

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found..

Boot error #1, break

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1D500014FCDD034471DC04D2EF9437F81A10B8AB
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Reading NPC certificate...
IMEI : 359054049267523
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\359054049267523_CRT_2nd.rpl

Will read flash content now...
Flash IC Size : 512 MB
Read done , 491 MB was readed

FullFlash saved to : 359054049267523_full.bin

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Done!!!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia N8-00
Software ver : V 79_sr1_11w42.5 25-11-11 RM-596 (c) Nokia
IMEI : 359054049267523
Ape Ver : 111.030.0609
APE Var : 111.030.0609111.030.0609.04.01111.030.0609.00.01
APE ADSP: 256
DSP Ver : 79_SR1_11w42.5
APE Test: 0.162
PPM :
CNT :
Product SN : MJO272015
Product code : 0599002
Base Prd.code: 0596828
Long Prod.SN : 0
Hardware info=======
HWID : 7600
Retu : 34
Tahvo : 00
Batery: 3935 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI : 359054049267523
IMEI spNet : 3A 95 50 04 94 62 57 02
IMEI svNet : 33 95 50 04 94 62 57 32 F3

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Damaged!!!!!
PA_SL3 phone , SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

[UO5OQ]

Когда эти значения в порядке (не повреждены).

IMEI : 359054049267523
SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok

RPL не нужен.
RPL и не предназначен для ремонта Security status : Damaged!!!!!
Это ремонтируется путём записи PM 1 и 309 полей с SX4 Авторизацией.