 |
 |
 |
|
|
|
|||||||
| RPL Nokia BB5 и DCT4 Помощь по записи RPL, поддержка пользователей. |
 |
|
|
Опции темы | Поиск в этой теме |
22.02.2012, 10:50
|
#1 |
|
Junior Member
Регистрация: 22.02.2012
Сообщений: 4
Вес репутации: 0  |
Nokia C5-03 Выключается после записи RPL
Nokia C5-03 imei 123456........? Родной imei отсутствует. Постоянна перезагружается. Заказал RLP записал после nokia белый экран секунд 5 и вырубается. Программатор cyclon. Как восстановить телефон
|
|
|
|
22.02.2012, 10:52
|
#2 |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,436
Вес репутации: 10   |
Re: Выключается после записи RLP
- Сотрите полностью телефон.
- Запишите только SW (прошивку). Будет ли работать нормально несколько минут с IMEI 123456.... ?
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
22.02.2012, 10:54
|
#3 | |
|
Moderator
Регистрация: 23.02.2011
Адрес: Moldova-Chisinau
Сообщений: 1,975
Вес репутации: 1136  |
Re: Выключается после записи RLP
Цитата:
|
|
|
|
|
|
22.02.2012, 10:55
|
#4 |
|
Junior Member
Регистрация: 22.02.2012
Сообщений: 4
Вес репутации: 0 |
Re: Выключается после записи RLP
Стирал работает минут 5 и перезагружается
|
|
|
|
|
22.02.2012, 10:57
|
#5 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,436
Вес репутации: 10 |
Re: Выключается после записи RLP
Цитата:
Теперь покажите: 1. Лог записи RPL 2. Лог чтения INFO телефона после записи RPL
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
| Пользователь сказал cпасибо: | GIZO (22.02.2012) |
|
22.02.2012, 11:14
|
#6 | |
|
Junior Member
Регистрация: 22.02.2012
Сообщений: 4
Вес репутации: 0 |
Re: Выключается после записи RLP
Цитата:
Лог:Initializing FBUS...
All initialized - Ready to work Failed to Write RPL File -> No RPL File Provided by User Skipping RPL decryption... Parsing decrypted RPL... Processing FBUS Part... Writing Simlock... Handling as SL1/SL2 Simlock Data Simlock NOT ACCEPTED ! Writing Superdongle key... Superdongle Key ACCEPTED OK ! Writing CMLA key... CMLA Key NOT ACCEPTED ! Writing WMDRM PD Data... WMDRM PD Data NOT ACCEPTED ! Processing FLASHBUS Part... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2060020F23FB55400713747B17143AA10706202D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: 1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 78E50A8766EC9CD99D190EEA9676987905B09588 APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits CMT NPC Erased CMT NPC Written CMT HWC Erased CMT HWC Written CMT CCC Erased CMT CCC Written Restarting MCU... Processing FBUS Part... Writing Simlock... Handling as SL1/SL2 Simlock Data Simlock NOT ACCEPTED ! Writing Superdongle key... Superdongle Key ACCEPTED OK ! Writing CMLA key... CMLA Key NOT ACCEPTED ! Writing WMDRM PD Data... WMDRM PD Data NOT ACCEPTED ! Processing FLASHBUS Part... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2060020F23FB55400713747B17143AA10706202D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: 1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 78E50A8766EC9CD99D190EEA9676987905B09588 APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits CMT NPC Erased CMT NPC Written CMT HWC Erased CMT HWC Written CMT CCC Erased CMT CCC Written Restarting MCU... Write RPL Finished! |
|
|
|
|
|
22.02.2012, 11:24
|
#7 |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,436
Вес репутации: 10 |
Re: Выключается после записи RLP
2. Лог чтения INFO телефона после записи RPL
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
22.02.2012, 11:24
|
#8 |
|
Junior Member
Регистрация: 22.02.2012
Сообщений: 4
Вес репутации: 0 |
Re: Nokia C5-03 Выключается после записи RPL
ЛОГИ
Скрытый текстFailed to read info -> Failed to read SP info
MCU Version V ICPR82_11w25.3 MCU Date 24-08-11 Product RM-697 (Nokia C5-03) Manufacturer (c) Nokia IMEI 3543490460xxxxx Mastercode 165731641 IMEI Spare 3A45430964408005 IMEI SV 3345430964408005F6000000 PSN 2B82F18AA Product Code 059C504 Module Code 0204650 Basic Product Code 059B215 PSD 0000000000000000 LPSN 0 WLAN MAC AC932F7FB473 APE SW V 21.0.003 APE Variant V 21.0.00321.0.00321.0.003 APE HW 256 APE ADSP 256 APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652. RETU 35 TAHVO 00 AHNE 11 HW 4000 RFIC |Vapaus_6.5 | Mikki_1.1 DSP ICPR82_11w23 Failed to read info -> Failed to read SP info Скрытый текстWriting Simlock...
Handling as SL1/SL2 Simlock Data Simlock NOT ACCEPTED ! Writing Superdongle key... Superdongle Key ACCEPTED OK ! Writing CMLA key... CMLA Key NOT ACCEPTED ! Writing WMDRM PD Data... WMDRM PD Data NOT ACCEPTED ! Processing FLASHBUS Part... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2060020F23FB55400713747B17143AA10706202D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: 1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 78E50A8766EC9CD99D190EEA9676987905B09588 APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits CMT NPC Erased CMT NPC Written CMT HWC Erased CMT HWC Written CMT CCC Erased CMT CCC Written Restarting MCU... Processing FBUS Part... Writing Simlock... Handling as SL1/SL2 Simlock Data Simlock NOT ACCEPTED ! Writing Superdongle key... Superdongle Key ACCEPTED OK ! Writing CMLA key... CMLA Key NOT ACCEPTED ! Writing WMDRM PD Data... WMDRM PD Data NOT ACCEPTED ! Processing FLASHBUS Part... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2060020F23FB55400713747B17143AA10706202D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: 1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 78E50A8766EC9CD99D190EEA9676987905B09588 APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits CMT NPC Erased CMT NPC Written CMT HWC Erased CMT HWC Written CMT CCC Erased CMT CCC Written Restarting MCU... Write RPL Finished! |
|
|
|
|
22.02.2012, 11:33
|
#9 | |||
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,436
Вес репутации: 10 |
Re: Nokia C5-03 Выключается после записи RPL
Цитата:
Цитата:
Цитата:
Возможно Cyclone Box не умеет записывать SLD в эту модель
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|||
|
|
|
