Скрытый текст

Svitch · 18.04.2011, 19:22

Проблему SECURITY_TEST failed! всегда вилечил записом РМ MX-KEY-ем. А на этом телефоне никак не могу победить эту инфекцию. Хотя запись РМ с сервера MX-KEY проходит без ошибок. Даже стер тело, прошил. Обратно залил бекап. Никак не могу победить. Что я пропустил?

Лог попитки лечение Бестом

Скрытый текст

Repair SD procedure started...

Phone Imei: 353101026308766
Key file exists, no need to read...
Check phone mode...
Phone in Charging mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key... Ok
Done!

Local SX4 procedure started...

Phone Imei: 353101026308766
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-364.pm
Check phone mode...
Phone in Charging mode
Seting Local mode... wait...
Local mode set

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 46 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED

Done!

Elapsed: 00:00:23

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!

-----------------------

PA_SimLock Version :
PA_SL2 phone detected

Done!

Phone disconected!

Connect phone on selected interface...

Лог мах-кея

Скрытый текст

Phone Type: RM-364 (Nokia 3120 classic)
SW Version: V 09.41 06-11-08 RM-364 (c) Nokia
Imei plain: 35310102630876-6
Product Code: 0559081
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei net: 353101026308766
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 8000000000000002

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

Скрытый текст

Scanning local SX4 Card ...
No SX4 Card found.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.6

Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 95.142.83.231
SUPERDONGLE authorized

!
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.6

Updating RFBB data ...
Writing section 1...
Writing section 309...
Done.

**UO5OQ** · 18.04.2011, 23:52

В таких случаях часто помогает запись HWC+CCC перед записью PM с SX4 Авторизацией.

Svitch · 19.04.2011, 09:46

Цитата:

Сообщение от UO5OQ

В таких случаях часто помогает запись HWC+CCC перед записью PM с SX4 Авторизацией.

Вот именно и эту процедуру я пропустил из за отсуствие HWC+CCC на этот модель.

Svitch · 19.04.2011, 10:37

Спасибо..Проблема решено макс кейем.
Service/Imei Security/Recover Cert.

П/с . Свистку респект и уважуха.

18.04.2011, 19:22	#1
Svitch Junior Member Регистрация: 10.03.2011 Сообщений: 8 Вес репутации: 0	3120c (rm-364) SECURITY_TEST failed! Проблему SECURITY_TEST failed! всегда вилечил записом РМ MX-KEY-ем. А на этом телефоне никак не могу победить эту инфекцию. Хотя запись РМ с сервера MX-KEY проходит без ошибок. Даже стер тело, прошил. Обратно залил бекап. Никак не могу победить. Что я пропустил? Лог попитки лечение Бестом Скрытый текст Repair SD procedure started... Phone Imei: 353101026308766 Key file exists, no need to read... Check phone mode... Phone in Charging mode Seting Test mode... wait... Test mode set Writing Super Dongle Key... Ok Done! Local SX4 procedure started... Phone Imei: 353101026308766 Key file exists, no need to read... Step 1... Step 2... Step 3... SX4 Auth - Ok Done! Uploading RF/Battery tune to phone... Using : RM-364.pm Check phone mode... Phone in Charging mode Seting Local mode... wait... Local mode set Field 1 Record 0 write - Ok Record 2 write - Ok Record 4 write - Ok Record 6 write - Ok Record 8 write - Ok Record 13 write - Ok Record 16 write - Ok Record 18 write - Ok Record 20 write - Ok Record 22 write - Ok Record 23 write - Ok Record 24 write - Ok Record 25 write - Ok Record 26 write - Ok Record 28 write - Ok Record 29 write - Ok Record 31 write - Ok Record 33 write - Ok Record 34 write - Ok Record 40 write - Ok Record 41 write - Ok Record 42 write - Ok Record 43 write - Ok Record 44 write - Ok Record 46 write - Ok Field 309 Record 0 write - Ok Record 1 write - Ok Record 2 write - Ok Record 4 write - Ok Record 5 write - Ok Record 7 write - Ok Record 8 write - Ok Record 17 write - Ok Check ST_SECURITY now... Security status : ST_SECURITY => DAMAGED Done! Elapsed: 00:00:23 Checking StartUp data ... ----------------------- SDD Key status : SD Data is Ok SimLock status : SimLock is Ok Security status : Security Damaged!!!!! ----------------------- PA_SimLock Version : PA_SL2 phone detected Done! Phone disconected! Connect phone on selected interface... Лог мах-кея Скрытый текст Phone Type: RM-364 (Nokia 3120 classic) SW Version: V 09.41 06-11-08 RM-364 (c) Nokia Imei plain: 35310102630876-6 Product Code: 0559081 Language Pack: - not available. SIMLOCK seems to be valid SUPERDONGLE_KEY[MX] seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST failed! Imei net: 353101026308766 Version: SIMLOCK SERVER Counter: 0/3, 0/10 CONFIG_DATA: 2440700000000000 PROFILE_BITS: 8000000000000002 BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF Скрытый текст Scanning local SX4 Card ... No SX4 Card found. SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.6 Authenticating using [MX] security server ... Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 95.142.83.231 SUPERDONGLE authorized ! SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.6 Updating RFBB data ... Writing section 1... Writing section 309... Done.

18.04.2011, 23:52	#2
UO5OQ ADMINISTRATOR Регистрация: 01.01.2011 Адрес: www.UO5OQ.com Сообщений: 14,426 Вес репутации: 10	В таких случаях часто помогает запись HWC+CCC перед записью PM с SX4 Авторизацией. __________________ ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com

19.04.2011, 10:37	#4
Svitch Junior Member Регистрация: 10.03.2011 Сообщений: 8 Вес репутации: 0	Спасибо..Проблема решено макс кейем. Service/Imei Security/Recover Cert. П/с . Свистку респект и уважуха.