Для большинства моделей Motorola, NCK код вводится просто при вставленной НЕпринимаемой SIM, по запросу кода телефоном.
Телефоны пишущие 'Contact service provider'- необходимо оставить включенными с НЕпринимаемой SIM на 2-30 часов,
через некоторое время они запросят ввести код.
Model : Motorola Z8
Так же как во все Motorola или при вставленной НЕпринимаемой SIM набрать **057*
Model : Motorola V9
Набрать C 073887* и Введите полученный на сервере www.UO5OQ.com КОД.

Model : All Motorola

1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - Введите полученный на сервере www.UO5OQ.com КОД

WARNING : If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the icon Phone
2 - Enter the following keys: ** 057 *
3 - Mobile displays "locking enter personalization"
4 - Введите полученный на сервере www.UO5OQ.com КОД
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Введите полученный на сервере www.UO5OQ.com КОД

Motorola 3G

If your phone is on a 3G network enter **057*
Введите полученный на сервере www.UO5OQ.com КОД into the window

Motorola CDMA & TDMA

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Введите полученный на сервере www.UO5OQ.com КОД
Your phone is now unlocked

Motorola MPX

Switch ON your phone with a not allowed SIM card
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Введите полученный на сервере www.UO5OQ.com КОД
Your phone is now unlocked
If phone is asking for NETWORK PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now Введите полученный на сервере www.UO5OQ.com КОД and 00000000 (eight zero's) as a new password.

If phone is asking for SERVICE PROVIDER PUK

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you