Nokia X3-02 RM-639 не записывается SIM LOCK из RPL

[sotart]

Новый RPL и simlock failed

Пришел телефон с проблемой contact service. Я заказал RPL, прислали RPL, я его записал через Cyclone box, логи прилагаю

Skipping RPL decryption...
Erasing Security...
Booting CMT...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 1C300018A69C03440E265E38520ACA6475CA0200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
APE Boot skipped on user request
CMT NPC Erased
Restarting MCU...
Parsing decrypted RPL...
Processing FBUS Part...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
Writing Simlock...
Handling as SL1/SL2 Simlock Data
Simlock NOT ACCEPTED !
Writing Superdongle key...
Superdongle Key ACCEPTED OK !
Writing WMDRM PD Data...
WMDRM PD Data NOT ACCEPTED !
Processing FLASHBUS Part...
Booting CMT...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 1C300018A69C03440E265E38520ACA6475CA0200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
APE Subsystem Not Found
CMT NPC Erased
CMT NPC Written
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Processing FBUS Part...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
Writing Simlock...
Handling as SL1/SL2 Simlock Data
Simlock NOT ACCEPTED !
Writing Superdongle key...
Superdongle Key ACCEPTED OK !
Writing WMDRM PD Data...
WMDRM PD Data NOT ACCEPTED !
Processing FLASHBUS Part...
Booting CMT...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 1C300018A69C03440E265E38520ACA6475CA0200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
APE Subsystem Not Found
CMT NPC Erased
CMT NPC Written
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!

SX4 Authorization / SD Repair Procedure Started....
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
"1C300018A69C03440E265E38520ACA6475CA0200.C0003688" Exists, That is good...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
MCU Version V 07.15
MCU Date 07-10-11
Product RM-639 (Nokia X3-02)
Manufacturer (c) Nokia
IMEI 353764043030224
Mastercode 2622461734
Reading Security Block...
Security block OK and saved to "RM-639_353764043030224_13.04.2012_194715.SecurityBloc k.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Found, writing...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
[1,0] Written, Length: 12 bytes, Status: OK
[1,1] Written, Length: 96 bytes, Status: OK
[1,2] Written, Length: 112 bytes, Status: OK
[1,4] Written, Length: 12 bytes, Status: OK
[1,6] Written, Length: 112 bytes, Status: OK
[1,7] Written, Length: 452 bytes, Status: OK
[1,8] Written, Length: 12 bytes, Status: OK
[1,13] Written, Length: 112 bytes, Status: OK
[1,15] Written, Length: 32 bytes, Status: OK
[1,16] Written, Length: 32 bytes, Status: OK
[1,17] Written, Length: 32 bytes, Status: OK
[1,18] Written, Length: 32 bytes, Status: OK
[1,19] Written, Length: 32 bytes, Status: OK
[1,22] Written, Length: 24 bytes, Status: OK
[1,26] Written, Length: 12 bytes, Status: OK
[1,27] Written, Length: 36 bytes, Status: OK
[1,28] Written, Length: 112 bytes, Status: OK
[1,29] Written, Length: 12 bytes, Status: OK
[1,30] Written, Length: 36 bytes, Status: OK
[1,31] Written, Length: 24 bytes, Status: OK
[1,32] Written, Length: 216 bytes, Status: OK
[1,33] Written, Length: 36 bytes, Status: OK
[1,35] Written, Length: 24 bytes, Status: OK
[1,36] Written, Length: 24 bytes, Status: OK
[1,38] Written, Length: 216 bytes, Status: OK
[1,39] Written, Length: 36 bytes, Status: OK
[1,40] Written, Length: 24 bytes, Status: OK
[1,41] Written, Length: 216 bytes, Status: OK
[1,43] Written, Length: 36 bytes, Status: OK
[1,44] Written, Length: 216 bytes, Status: OK
[1,45] Written, Length: 216 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 4 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,3] Written, Length: 36 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 38, Record written NOT OK: 0
Started Phone Security Analysis...
[Nokia X3 Touch and Type USB Phonet]: Port opened OK!
MCU Version V 07.15
MCU Date 07-10-11
Product RM-639 (Nokia X3-02)
Manufacturer (c) Nokia
IMEI 353764043030224
Mastercode 2622461734
Reading Security Block...
Security block OK and saved to "RM-639_353764043030224_13.04.2012_194747.SecurityBloc k.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --

Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.

-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"1C300018A69C03440E265E38520ACA6475CA0200.C0003688" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!

ПМ тоже проливал с рабочего телефона без 120 и 308 блока
Помогите разобраться

[UO5OQ]

Writing Simlock...
Handling as SL1/SL2 Simlock Data
Simlock NOT ACCEPTED !
Похоже Cyclone Box не умеет записывать SIM LOCK DATA в эту модель.
Точно запишет BEST, MX-Box скорее всего тоже запишет.

[sotart]

Похоже Cyclone Box не умеет записывать SIM LOCK DATA в эту модель.
Точно запишет BEST, MX-Box скорее всего тоже запишет.
Best через USB не хочет писать RPL, через UFS говорит что бутлоудер не подходит, пробывал писать и ATF и через него точно также

Добавлю шил RPL по USB и FBAS.

[UO5OQ]

Best через USB не хочет писать RPL, через UFS говорит что бутлоудер не подходит, пробывал писать и ATF и через него точно также

Добавлю шил RPL по USB и FBAS.
BEST по USB пишет RPL в SL30 телефоны. Именно в X3-2 RM-639 тоже записывали пользователи.
сделал я этот ТА с помощью BEST-а, просто и легко с версией 1.16 который не один бокс не смог записать SIMLOCK, респект BEST - у просто нет слов,тему можно закрыть. (http://www.mobile-files.ru/forum/showpost.php?p=1924883&postcount=15)
Попробуйте, как выше пишет Firuz88, версией 1.16 BEST.

Вот ещё темы по успешной записи заводского RPL в X3-2 RM-639
http://www.mobile-files.ru/forum/showthread.php?t=275048
http://www.mcrf.ru/forum/showpost.php?p=222451&postcount=163
http://forum.shaarpmind.com/showthread.php/108530-X3-02-Write-RPL-Done****-probably-First-in-World-(thanks-to-enzawigroup)

[sotart]

BEST по USB пишет RPL в SL30 телефоны. Именно в X3-2 RM-639 тоже записывали пользователи.

Попробуйте, как выше пишет Firuz88, версией 1.16 BEST.

Вот ещё темы по успешной записи заводского RPL в X3-2 RM-639
http://www.mobile-files.ru/forum/showthread.php?t=275048
http://www.mcrf.ru/forum/showpost.php?p=222451&postcount=163
http://forum.shaarpmind.com/showthread.php/108530-X3-02-Write-RPL-Done****-probably-First-in-World-(thanks-to-enzawigroup)

Спасибо за помощь, не думал что Cyclone и ATF ток могут облажаться, версия Best 1.42 выкидывал ошибку, обновил до 1.43 и все ок логи прилогаю

card found: S/N 2xxxxxx
registered to: sotart

Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 1C300018A69C03440E265E38520ACA6475CA0200
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.2.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 353xxxxx
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\353764xxxxxx_CRT_2 nd.rpl

All done, Disconnecting

Elapsed: 00:00:19
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Will Write CCC/HWC keys now...

Using : RM-639.rpl
CCC Data found!
HWC Data found!

Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 1C300018A69C03440E265E38520ACA6475CA0200
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.2.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for write certificates...

Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
All done, disconneting...

Done!

Elapsed: 00:00:03

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...


Тема закрыта