E90 RA-6 Как восстановить IMEI ?

[marbek]

После русификации не входил в локал и не включался Nokia E90 (RA-6), попробовал mx-key + UFS - ом BB5 downgrade fix - om исправить, но кроме того что не исправил ситуацию, а еще и потерял IMEI.
После нескольких попыток получилось прошить E51_blank_504KB_pmm_10.fpsx и аппарат оказался в локале, но уже ясное дело что без IMEI, с бекапа вроде восстанавливаю, но без успешно. Удалил все и заново попробовал MX-Key, но не прописивает, и SLD нет вроде в RPL.
MXKEY Serial: [FT SCR2000 0] - C080B58B
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 2.0.0.0 , NTMP ver: 2.0.0.1
Module ver: 1.0.0.17309(31-05-2011), Library ver: 1.0.0.10695(31-05-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 09AEBA92DBEBDE818B259ABA3870742D4B351BAC
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1A500114FD8C0158F71A1874C7D5F21531DA78BA
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
FlashID0: 00EC 0040 - 0022 0000 [Samsung 2Gb DDP OneNAND,2 Gbits] type: NAND,APE
ALG [35]: OMAP2420 UNISTORE-II-1.5.1 ALG
Algorithm: teflon_sam_nand_xsr151_m1.fg [OMAP2420 UNISTORE-II-1.5.1 ALG] version: 1.57.0 revision: 0.0 size: 0x2E248
Supported Ids: 24200703, 24200704, 24200705, 24200706
APE PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
Original Imei: Empty
Original Product code: Empty
NPC_DATA invalid !
SIMLOCK PA identifier:
[0] PA_SL

Phone Type: RA-6 (Nokia E90)
SW Version: V 400.41.03 09-02-09 RA-6 (c) Nokia
Imei plain: 12345610654321-?
Product Code: 0545999
Battery voltage: 4020 mV, current: 275 mA
Language Pack:
- not available.

Imei plain is invalid !!!
Imei net: 12345610654321?
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

Так как восстановить IMEI телефона ?

[UO5OQ]

Приложите к сообщению самые первые Бэкапы в архиве.
Посмотрим, что в них есть

[UO5OQ]

NPC_DATA в выложеном вами Бэкапе - адекватная.
Но проверить Бэкап полностью невозможно никак и нигде.
Только пробовать записать его в телефон.

Попробуйте сделать так:

- Бэкап NPC или Full RPL ремонтируемого телефона (если Full, то потом вырезаем из него всё кроме NPC)
- Полное стирание (соответствующим объёму памяти телефона Erase файлом или по адрессам в MX-KEY)
- Запись SW любой версии, главное соответствующего железу RM-xxx
- Запись Full RPL (можно без NPC и SLD) считанного из такой же (полностью рабочей) модели
- Запись родной NPC
- Rep SL
- Rep SD
- SUPER SD AUTH и запись Full РМ без 120 и 308 поля

Если после этого IMEI не восстановится, то придётся заказывать RPL >>> (http://www.uo5oq.com/index.php?do=usercp&go=rpl&select=request&productid=1)

[marbek]

Вот с RPL - ом лог, даже удалил все, заново прошивал UFS - ом, потом mx-key опять выдает ошибку
Imei: 353*********
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 09AEBA92DBEBDE818B259ABA3870742D4B351BAC
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1A500114FD8C0158F71A1874C7D5F21531DA78BA
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
FlashID0: 00EC 0040 - 0022 0000 [Samsung 2Gb DDP OneNAND,2 Gbits] type: NAND,APE
ALG [35]: OMAP2420 UNISTORE-II-1.5.1 ALG
Algorithm: teflon_sam_nand_xsr151_m1.fg [OMAP2420 UNISTORE-II-1.5.1 ALG] version: 1.57.0 revision: 0.0 size: 0x2E248
Supported Ids: 24200703, 24200704, 24200705, 24200706
APE PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
Updating CMT NPC ...OK
Updating CMT CCC ...failed, Result: 0290000000517200

Phone not responding !

[UO5OQ]

IMEI я вижу восстановился.

Теперь сделайте следующее: Восстановление ПО Nokia BB5 с помощью RPL. Инструкция. (http://www.uo5oq.com/forum/showthread.php?t=32)

[marbek]

нет

Imei: 3536*******
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 09AEBA92DBEBDE818B259ABA3870742D4B351BAC
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1A500114FD8C0158F71A1874C7D5F21531DA78BA
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
FlashID0: 00EC 0040 - 0022 0000 [Samsung 2Gb DDP OneNAND,2 Gbits] type: NAND,APE
ALG [35]: OMAP2420 UNISTORE-II-1.5.1 ALG
Algorithm: teflon_sam_nand_xsr151_m1.fg [OMAP2420 UNISTORE-II-1.5.1 ALG] version: 1.57.0 revision: 0.0 size: 0x2E248
Supported Ids: 24200703, 24200704, 24200705, 24200706
APE PAPUBKEYS HASH: CCE4D6D72835B461FE6259BFF52C5566B3FAB11C
Erasing CMT NPC ... OK
Updating CMT NPC ...OK
Erasing CMT CCC ... Error SyncPhone
Updating CMT CCC ...failed, Result: 0290000000517200

Phone Type: RA-6 (Nokia E90)
SW Version: V 400.41.03 09-02-09 RA-6 (c) Nokia
Imei plain: 12345610654321-?
Battery voltage: 4087 mV, current: 284 mA
Language Pack:
- not available.

[UO5OQ]

Erasing CMT NPC ... OK
Updating CMT NPC ...OK
Erasing CMT CCC ... Error SyncPhone
Updating CMT CCC ...failed, Result: 0290000000517200

Updating CMT NPC ...OK - IMEI записался, но возможно некорректно из-за дальнейшей ошибки MX-KEY: Updating CMT CCC ...failed, Result: 0290000000517200

Кроме MX-KEY какие боксы у вас есть?

[marbek]

Universal Box - ом попробую и напишу, спасибо за внимание

[UO5OQ]

Universal Box - ом попробую и напишу, спасибо за внимание
Наверно даже лучше будет записать RPL в эту модель с помощью JAF, даже ломаного.

[marbek]

JAF version 1.98.62
Detected PKEY: 9000ACED
Card life counter: 99.99%
P-key nokia module version 01.02
Detected UFS_USB V2.8 (c) SarasSoft 2007. version: 01.B1, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.39.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 400.41.03
09-02-09
RA-6
(c) Nokia
PCI version:
RFIC version:  17141715
DSP version: ES_CDSP_06w41pb_08w33
Retu version: 15
Tahvo version: 22
Production serial number: 0
Product code:
Module code:
Basic production code:
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 12345610654321?
IMEI spare to net: 1A 32 54 16 60 45 23 01
IMEI SV to net: 13 32 54 16 60 45 23 41 F0

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RA-6.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code:
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RA-6\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RA-6\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RA-6\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RA-6\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RA-6\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-6\ra6_400.34.93_prd.c00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-6\ra6_400.34.93_prd.v16
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-6\ra6_400.34.93.01U
APE Variant file: NONE
Done!
Scanning RPL file...
NPC DATA OK...
VARIANT DATA NOT FOUND...
CCC DATA OK...
HWC DATA OK...
NPC APE DATA OK...
VARIANT APE DATA NOT FOUND...
CCC APE DATA OK...
HWC APE DATA OK...
SIMLOCK DATA OK...
SIMLOCK KEY DATA OK...
SUPERDONGLE KEY DATA OK...
CMLA KEY DATA OK...
WMDRM PD DATA NOT FOUND...
Connecting to phone...
Writing SIMLOCK DATA and SIMLOCK DATA KEY...
Writing SUPER DONGLE KEY...
Writing CMLA KEY DATA...
FAST PHONE detected!
Error finding cmt boot file...

[UO5OQ]

Или что-то с системой компьютера, либо интерфейс UFS не нравится телефону или F-BUS кабель.
Есть у вас сам JAF Box?

[marbek]

Проблема было решено на другом компьютере на другом mx-key + UFS ... и скорее всего с загрузчиками было проблема ...
всем спасибо за помощь и внимание ...

[goodmaster]

Проблема было решено на другом компьютере на другом mx-key + UFS ... и скорее всего с загрузчиками было проблема ...
всем спасибо за помощь и внимание ...

Hello my friends, I've got the same problem with N82 and I did ask-> RPL, and cannot write CCC APE :(

MXKEY Serial: [FT SCR2000 0] - C08471D8
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.6.0.0, NTMP ver: 2.6.0.0
Module ver: 1.0.0.16978(13-05-2011), Library ver: 1.0.0.10071(13-05-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 418EA18BC3FE125C5FE097AAE3A76DF35CFA0F71
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 053001065A6B0052A0A0733C847841C9FF38EDF4
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
FlashID0: 00EC 0040 - 0022 0000 [Samsung 2Gb DDP OneNAND,2 Gbits] type: NAND,APE
ALG [35]: OMAP2420 UNISTORE-II-1.5.1 ALG
Algorithm: teflon_sam_nand_xsr151_m1.fg [OMAP2420 UNISTORE-II-1.5.1 ALG] version: 1.57.0 revision: 0.0 size: 0x2E248
Supported Ids: 24200703, 24200704, 24200705, 24200706
APE PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
Original Imei: Empty
Original Product code: Empty
NPC_DATA invalid !
SIMLOCK PA identifier:
[0] PA_SL2

Phone Type: RM-313 (Nokia N82)
SW Version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 12345610654321-?
Battery voltage: 4456 mV, current: 138 mA
Language Pack:
- not available.

Imei plain is invalid !!!
Imei net: 12345610654321?
Version: SIMLOCK SERVER
Provider: ERA GSM (Polska Telefonia Cyfrowa Sp. Z.o.o.) , Country: Poland
Counter: 0/3, 0/10

CONFIG_DATA: 2600200000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=CLOSED(MCCMNC), DATA=26002F [Poland-ERA GSM (Polska Telefonia Cyfrowa Sp. Z.o.o.) ]
BLOCK2: 1=CLOSED(MCCMNC), DATA=26002F [Poland-ERA GSM (Polska Telefonia Cyfrowa Sp. Z.o.o.) ]


I use windows7 and mx-key + HWK UFS2, I use write RPL and cannot write CCC :-/, plese help me :) How do you write this CCC and repair selfphone?

Kindest regards, спасибо
Пожалуйста, помогите, пожалуйста, пишите на английском языке
P.S. Should I modify .rpl file ? Did you do that or you has written an originall .rpl ?

[UO5OQ]

Hi, goodmaster
Did You get RPL on our server www.UO5OQ.com ?
Tell me please Your server Login.
I need check Your ASK and RPL files.

[goodmaster]

Hi, goodmaster
Did You get RPL on our server www.UO5OQ.com ?
Tell me please Your server Login.
I need check Your ASK and RPL files.

Hi my friend, thank You so much for Your answer, I've used other place to get rpl.
I've created .ask file with mx-key and UFS HWK.

If you give me your e-mail I can send to You .rpl and .ask file.

Best regards,
Przemyslaw

[UO5OQ]

Hi my friend, thank You so much for Your answer, I've used other place to get rpl.
I've created .ask file with mx-key and UFS HWK.

If you give me your e-mail I can send to You .rpl and .ask file.

Best regards,
Przemyslaw
Here is my e-mail: [email protected]
Please send Your ASK and RPL files for checking.

[goodmaster]

Hi, goodmaster
Did You get RPL on our server www.UO5OQ.com ?
Tell me please Your server Login.
I need check Your ASK and RPL files.

Here is my e-mail: [email protected]
Please send Your ASK and RPL files for checking.

Ok, You should have this files in your mailbox :)

I've created .rpl in other place

[UO5OQ]

Ok, You should have this files in your mailbox :)

I've created .rpl in other place
Yes, I get files.
Please wait some time, I'll analyse files.

[goodmaster]

Yes, I get files.
Please wait some time, I'll analyse files.

Hi ;), and have you got some news about my .rpl and .ask file? I think that should be ok.

[UO5OQ]

Hi ;), and have you got some news about my .rpl and .ask file? I think that should be ok.
Yes, Your RPL looks ok. But full inspection is possible from Nokia factory only :)
Please post log of RPL writing.

[goodmaster]

Scanning RPL file...
NPC DATA OK...
VARIANT DATA NOT FOUND...
CCC DATA OK...
HWC DATA OK...
NPC APE DATA OK...
VARIANT APE DATA NOT FOUND...
CCC APE DATA OK...
HWC APE DATA OK...
SIMLOCK DATA OK...
SIMLOCK KEY DATA OK...
SUPERDONGLE KEY DATA OK...
CMLA KEY DATA OK...
WMDRM PD DATA OK...
Connecting to phone...
Writing SIMLOCK DATA and SIMLOCK DATA KEY...
Writing SUPER DONGLE KEY...
Writing CMLA KEY DATA...
Writing WMDRM PD DATA...
FAST PHONE detected!
Error finding cmt boot file...
Imei: 35xxxxxxxxxxx
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 418EA18BC3FE125C5FE097AAE3A76DF35CFA0F71
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 053001065A6B0052A0A0733C847841C9FF38EDF4
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
FlashID0: 00EC 0040 - 0022 0000 [Samsung 2Gb DDP OneNAND,2 Gbits] type: NAND,APE
ALG [35]: OMAP2420 UNISTORE-II-1.5.1 ALG
Algorithm: teflon_sam_nand_xsr151_m1.fg [OMAP2420 UNISTORE-II-1.5.1 ALG] version: 1.57.0 revision: 0.0 size: 0x2E248
Supported Ids: 24200703, 24200704, 24200705, 24200706
APE PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
Updating CMT NPC ...OK
Updating CMT CCC ...failed, Result: 0290000000517200
Updating SIMLOCK...OK
Updating SUPERDONGLE_KEY ...OK
Updating CMLA_KEY...OK
Updating WMDRM_PD...OK
Using Tx2 Data line.
Trying boot BB5 phone...

RAPIDOv11_2nd.fg
RAPIDOv11_XSR15_alg.fg
Delay for loader to take control...
BOOT OK CMT New Protocol
OMAP2420_2nd.fg
Failed to send APE 2ND LOADER
Command reset failed, using HW switch.
Trying boot DCT4 phone...

============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0

[UO5OQ]

Looks like wrong NPC_DATA in RPL file :(
Or something wrong in Your windows.
Try write RPL in WinXP via MX-KEY and JAF or UFS interface.

[goodmaster]

Looks like wrong NPC_DATA in RPL file :(
Or something wrong in Your windows.
Try write RPL in WinXP via MX-KEY and JAF or UFS interface.

Hmm, I hope that .rpl will be ok :/ I have to check with WIN XP and mxkey + UFS. Somebody from this forum solve this problem ;) on new machine (PC) ?

[UO5OQ]

Hmm, I hope that .rpl will be ok :/ I have to check with WIN XP and mxkey + UFS. Somebody from this forum solve this problem ;) on new machine (PC) ?
Yes, this user solved:
Проблема было решено на другом компьютере на другом mx-key + UFS ... и скорее всего с загрузчиками было проблема ...
всем спасибо за помощь и внимание ...
short English translation:
Problem was solved on another PC, with another mx-key + UFS

[goodmaster]

Yes, this user solved:

short English translation:

I read this N82 via hwk and his software dctxbb5 tool and get information that APE is ok etc. but if I want to write cert with option "wr Cert" and I open .rpl file, appears windows with information "Bad or unsuported Certificate file: .." Why?
1ST BOOT : C0,0B [Rm-313] [2.2.0.0]
APE ASICID: 24200705
APE MODE : 00
APE PUBID : 418EA18BC3FE125C5FE097AAE3A76DF35CFA0F71
APE HASH : BA8710A7E1CD5A2909B9A875DB27AA24
CMT ASICID: 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
CMT PUBID : 053001065A6B0052A0A0733C847841C9FF38EDF4
CMT MODE : 00
CMT HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROMID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
PASUBTOC : PA_SL2
Rebooting Mobile

[UO5OQ]

I read this N82 via hwk and his software dctxbb5 tool and get information that APE is ok etc. but if I want to write cert with option "wr Cert" and I open .rpl file, appears windows with information "Bad or unsuported Certificate file: .." Why?
1ST BOOT : C0,0B [Rm-313] [2.2.0.0]
APE ASICID: 24200705
APE MODE : 00
APE PUBID : 418EA18BC3FE125C5FE097AAE3A76DF35CFA0F71
APE HASH : BA8710A7E1CD5A2909B9A875DB27AA24
CMT ASICID: 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
CMT PUBID : 053001065A6B0052A0A0733C847841C9FF38EDF4
CMT MODE : 00
CMT HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROMID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
PASUBTOC : PA_SL2
Rebooting Mobile
Coz UFS have another RPL format.
This RPL file can't be writed by UFS program.