лог mx
Phone type: RM-643 (C1-02)
SW version: V 06.15 25-11-11 RM-643 (c) Nokia
Imei plain: 35433404330631-0
Product code: 059B0C6
Battery voltage: 3544 mV, current: 0 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: I
Language Pack:
- not available.
SIMLOCK_DATA corrupted!
best
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
----------------------
RAP_BOOT: 0000000000000000
RAP_PUB: 0000000000000000000000000000000000000000
CMT_ROOT: 00000000000000000000000000000000
RAP_PAPUB: 0000000000000000000000000000000000000000
----------------------
Live Test Ok!
----------------------
CNT sector : 128 kb
------------------------
INFINEON : SDData is not present (It is Ok)
CMLA Key status : read data error
SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
я так понимаю нужен rpl?
ни разу не заказывал-помогите советом
скажите как считать ask?
прошивка best
card found: S/N A304:0120
registered to: 00A304C3E2
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
----------------------
RAP_BOOT: 0000000000000000
RAP_PUB: 0000000000000000000000000000000000000000
CMT_ROOT: 00000000000000000000000000000000
RAP_PAPUB: 0000000000000000000000000000000000000000
----------------------
Live Test Ok!
----------------------
CNT sector : 128 kb
------------------------
INFINEON : SDData is not present (It is Ok)
CMLA Key status : read data error
SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
-> Error answer from BootRom
Boot error #1, break :(
Error on SPR reading :(
Phone disconected!
Connect phone on selected interface...
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading ASK request file...
Seems it is not standart BB5 phone, read failed :(
Reading ASK request file...
Seems it is not standart BB5 phone, read failed :(
Reading ASK request file...
Seems it is not standart BB5 phone, read failed :(
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Error When resetting Full factory :( ...
Settings Software Upgrade Defaults...
Error When setting Software Upgrade Defaults :( ...
Settings Service Centre Defaults...
Error When setting Service Centre defaults :( ...
Settings Production Tune Defaults...
Error When settinng Production Tune defaults :( ...
Settings User Data Defaults...
Error When setting User Data defaults :( ...
Settings Leave Factory defaults...
Error When setting Leave Factory Defaults :( ...
Elapsed: 00:00:01
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Core : v1.59 , BB5XG FlashEngine : v3.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm643__06.15.mcusw
PPM : rm643__06.15.ppm_i
CNT : rm643__06.15.image_i_059B0C6
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...
Batery voltage : 3578 mV
-> Batery voltage less, than 3,8V (3578mV). Continue at user risk
SL3 Simlock read (XGOLD) ... Ok
Reboot....
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_2.5_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI : 354334043306310
PCcode : 059B0C6
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\354334043306310_XG 213.rpl
===Flashing [MCU]===
File : rm643__06.15.mcusw
Image : rm643__06.15.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:15
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash done, time : 00:00:36
===Flashing [PPM]===
File : rm643__06.15.ppm_i
Image : package_i.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:20
Write , Start : 0x41C00000 , Len : 0x0038735C
Flashing , wait ...
Region flash done, time : 00:00:04
===Flashing [CNT]===
File : rm643__06.15.image_i_059B0C6
Image : package_i_059B0C6.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:03:47
Write , Start : 0x42200000 , Len : 0x00BA0000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
Flashing done!
Total flash time : 00:07:40
Reboot phone now...
Reading Phone Info....
Connected phone - C1-02
Software Info: V 06.15 25-11-11 RM-643 (c) Nokia
IMEI: 354334043306310
PPM version : V 06.15 25-11-11 RM-643 (c) Nokia I
Product code: 059B0C6
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
===== WARNING =====
Battery voltage is can be not enough for start
===== WARNING =====
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:08:16
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:02
Увы, Nokia C1-02 RM-643 на платформе X-Gold.
Телефоны Nokia X-Gold со стёртой SIM LOCK DATA или полностью стёртые, не восстановить на данный момент ничем :(
vBulletin® v3.8.7, Copyright ©2000-2026, Jelsoft Enterprises Ltd. Перевод: zCarot