5228 RM-625 при включении срабатывает вибро, телефон не включается.

[Андрей]

Телефон при включении срабатывает вибро и далее ничего.
Телефон не битый и влаги нет. Пробовал греть телефон Результат тот же.
1ST BOOT : C0,07 [Rm-625] [2.2.0.3]
CMT ASICID: 000000010000022600010006400C192101051105
EM 1 ID : 00000295
EM 2 ID : 00000B22
CMT PUBID : 1A100201B7AB005242C067FB6F54EE6F657A0CD1
CMT MODE : 00
CMT HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROMID : 4B9B75103E691FF8
CMT 1ST Boot OK
Cannot Find KEYS CERT
BAD BOOT
ERR: CMT 2ND Boot File not Found
Rebooting Mobile

MCU SW : A
PPM SW : A
Prd.Code: A
Bpr.Code: 0587946
Prod.Sn : A
HW Vers : A
PCI Vers: A
UEM :
UPP : A
RFIC Ver: A
DSP Vers: A
LCD Type: A
IMEI : ---
SL Conf : 000-00-00000000000
SL Prof : 000000000000000-0
SL Var : 140C00000000014103DA
SL Aux : 00000000
Box Id : 0000000001420FDF
SL Data Corrupted
Provider: Not Found

Files Set for Flashing :
MCU : RM-625_50.1.001_prd.core.C00
PPM : RM-625_50.1.001_prd.rofs2.V05
PPM2 : RM-625_50.1.001_C02_prd.rofs3.fpsx
CNT : RM625_50.1.001_000_000_U001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1A100201B7AB005242C067FB6F54EE6F657A0CD1
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-625_50.1.001_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-625_50.1.001_prd.core.C00
Total 417 [417/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:30
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-625_50.1.001_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x06CE0000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-625_50.1.001_prd.rofs2.V05
Total 108 [108/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:08
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-625_50.1.001_C02_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-625_50.1.001_C02_prd.rofs3.fpsx
Total 29 [29/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:02
PPM Write done
===Flashing [CNT]===
Erase : Processing RM625_50.1.001_000_000_U001.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM625_50.1.001_000_000_U001.uda.fpsx
Total 69 [69/0/0] blocks to write, writing...
TIME : Write time : 00:00:06
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:48
Reboot phone now...

- > AfterFlash Failed! :( Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy

[UO5OQ]

Покажите лог чтения RPL с помощью BEST через F-BUS интерфейс и лог INFO от BEST по F-BUS.
И приложите сам файл RPL бэкапа.

[Андрей]

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1A100201B7AB005242C067FB6F54EE6F657A0CD1
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15


CFL : RAPIDO Mode - FLASH CRT (NPC/CCC/HWC...) can't be readed

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

Wait, reconneting...

- > Phone not found... :(
- > CertRead failed : phone was not bootup
- > Connection/SW/HW problem, try bootup manually

Phone disconected

Connect phone on selected interface...

Backup Certificates now...
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
- > 1. Check cable/connection, try again
- > 2. Maybe HW fault or bad cable


Init Service mode... Wait...

Init service mode fail! Can't read flex keys

не сохраняет сам файл RPL
в локал телефон не входит

[UO5OQ]

Судя по логам, телефон не видится по F-BUS, а по USB кое-как.
Больше похоже на аппаратную неисправность.
Но вполне возможно, что F-BUS кабель не в порядке.

Есть ещё какой-то Бокс по Nokia?
Попробуйте им прочитать бэкап RPL по F-BUS.

[Андрей]

да есть циклон. Он так же не хочет читать.
Кабель отпадает Так как Я пробовал другой тел подключать5230. Его он подключает нормально

[UO5OQ]

да есть циклон. Он так же не хочет читать.
Кабель отпадает Так как Я пробовал другой тел подключать 5230. Его он подключает нормально
Значит 100% проблема аппаратная.