GSM Форум www.UO5OQ.com - Nokia C6 RM-неизвестный, надо восстановить ПО

GSM Форум www.UO5OQ.com (https://www.uo5oq.com/forum/index.php)

- Nokia (https://www.uo5oq.com/forum/forumdisplay.php?f=18)

- - Nokia C6 RM-неизвестный, надо восстановить ПО (https://www.uo5oq.com/forum/showthread.php?t=1165)

Nokia C6 RM-неизвестный, надо восстановить ПО

Пришёл тел с битым имеем, я заказал RPL он не дождался забрал тел, потом опять принёс , подключаю к мхкеу опрделяет как RM-601, на наклейке rm-540, на расчитаном RPL rm-718 залил rpl теперь тел пишет ошибка самотестирования телефона как мне быть?

Re: rm-не известный, c6 на до завести

скорей всего его для руссификации прошили на 601 а его родной 718

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8092)

Пока можно на 100% точно сказать только то, что процессор установленный в этом телефоне от RM-718 (если клиент пока ходил туда-сюда не поменял плату или процессор, но это можно легко проверить прочитав ASK из телефона сейчас и сравнив этот ASK с тем, который вы загружали на расчёт RPL).

Покажите лог записи RPL и лог чтения INFO из телефона после записи RPL.

Вот лог с BEST

Скрытый текст

Reading Phone Info....
Connected phone - Nokia C6-01
Software Info: V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI: 12345610654321?
Ape Version: 022.014
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!

теперь нужна прошивка RM-601 но где можно скачать?

ask проверил, свой

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8099)

Вот лог с BEST

Скрытый текст

Reading Phone Info....
Connected phone - Nokia C6-01
Software Info: V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI: 12345610654321?
Ape Version: 022.014
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!

теперь нужна прошивка RM-601 но где можно скачать?

ask проверил, свой

Значит вам надо восстанавливать ПО этого телефона как RM-718
Стирайте его полностью и записывайте прошивку для RM-718, потом запись RPL и так далее по стандартной схеме.

Re: rm-не известный, c6 на до завести

вот что получилось

Скрытый текст

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI : 358627040631457
Ape Ver : 022.014
APE Var : 022.014022.014.04.01022.014.00.01
APE ADSP: 256
DSP Ver : 92_11w25
APE Test: 0.063
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4074 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 358627040631457
IMEI spNet : 3A 85 26 07 04 36 41 05
IMEI svNet : 33 85 26 07 04 36 41 15 F8

Unable to read Lock table... :(
CRT308 Backup Created

SDD key status : Damaged!!!!!
SimLock status : Damaged!!!!!
Security status : Damaged!!!!!
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Repair SD procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...!

Repair SD procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...!

Repair SL procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...! ( SL3 phone? )

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
- > Do REPAIR SDD , Local SX4 if needed

SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL

Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Repair SD procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...!

Re: rm-не известный, c6 на до завести

Цитата:

Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia

Не стёрт полностью телефон. Поэтому и SLD не восстановилась.

Re: rm-не известный, c6 на до завести

я так и понял

Re: rm-не известный, c6 на до завести

вот скачадл прошивку

Скрытый текст

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02

Reading NPC certificate...
IMEI : 358627040631457
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358627040631457_CRT.rpl

ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x3FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:03

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.39 , FlashEngine : v1.21

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-601_111.030.0609_79u_prd.core.fpsx
PPM : RM-601_111.030.0609_19.01_China_79u_prd.rofs2.fpsx
PPM2 : RM-601_111.030.0609_C01.01_PRC_79u_prd.rofs3.fpsx
CNT : RM-601_111.030.0609_U02.01_79u.uda.fpsx
APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving

===Flashing [MCU]===
Erase : Processing RM-601_111.030.0609_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-601_111.030.0609_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 504 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing RM-601_111.030.0609_19.01_China_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-601_111.030.0609_19.01_China_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 165 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-601_111.030.0609_C01.01_PRC_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-601_111.030.0609_C01.01_PRC_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing RM-601_111.030.0609_U02.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-601_111.030.0609_U02.01_79u.uda.fpsx
Total writen 469 blocks
TIME : Write time : 00:00:21
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 21 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:51
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C6-01
Software Info: V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
IMEI: 12345610654321?
Ape Version: 111.030.0609
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!

Elapsed: 00:01:07
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia C6-01
Software ver : V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
IMEI : 358627040631457
Ape Ver : 111.030.0609
APE Var : 111.030.0609111.030.0609.19.01111.030.0609.C01.01
APE ADSP: 256
DSP Ver : 79_SR1_11w42.5
APE Test: 0.064
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4031 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 358627040631457
IMEI spNet : 3A 85 26 07 04 36 41 05
IMEI svNet : 33 85 26 07 04 36 41 35 F3

Unable to read Lock table... :(
CRT308 Backup Created

SDD key status : Damaged!!!!!
SimLock status : Damaged!!!!!
Security status : Damaged!!!!!
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Repair SD procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...!

Repair SD procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...!

Repair SL procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...! ( SL3 phone? )

Repair SL procedure started...

Phone Imei: 358627040631457

- > Power Off phone, dissconnect it and connect

- > Phone was not powered Off

Can't read Unique data! :(
Repair fail...! ( SL3 phone? )

Re: rm-не известный, c6 на до завести

а РМ пробывал пролить?

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8105)

вот скачадл прошивку
Files Set for Flashing :

Код:

MCU : RM-601_111.030.0609_79u_prd.core.fpsx

PPM : RM-601_111.030.0609_19.01_China_79u_prd.rofs2.fpsx

PPM2 : RM-601_111.030.0609_C01.01_PRC_79u_prd.rofs3.fpsx

CNT : RM-601_111.030.0609_U02.01_79u.uda.fpsx

APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx

Flashing phone now...

Вы упорно пишете в него RM-601
Почему?

Re: rm-не известный, c6 на до завести

Пробовал с полной очисткой вы не можете выкласть сюда ССС, HWC от RM-601 попробую сделать ресторе.

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8134)

Пробовал с полной очисткой вы не можете выкласть сюда ССС, HWC от RM-601 попробую сделать ресторе.

его скорей всего и убили прошив RM-601 и зачем его дальше добивать.Прошей RM-718 и попробуй на нём востановить

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8092)

Пришёл тел с битым имеем, я заказал RPL он не дождался забрал тел, потом опять принёс , подключаю к мхкеу опрделяет как RM-601, на наклейке rm-540, на расчитаном RPL RM-718...

Цитата:

Сообщение от UO5OQ (Сообщение 8112)

Вы упорно пишете в него RM-601
Почему?

Правильнее будет восстанавливать телефон в RM-718.

Re: rm-не известный, c6 на до завести

ну делаю так: на best, erase flash, прошиваю, заливаю RPL
как стирать на MX-KEY не знаю, делаю через USB.

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8137)

ну делаю так: на best, erase flash, прошиваю, заливаю RPL
как стирать на MX-KEY не знаю, делаю через USB.

Во вкладке сервис -Рм - ерейс РМ

Re: rm-не известный, c6 на до завести

он всё стирает или только Pm

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8139)

он всё стирает или только Pm

Только РМ но этого достаточно. После стирания сразу залей РПЛ

Re: Nokia C6 RM-неизвестный, надо восстановить ПО

ЗАчем после стирания лить туда рпл?) Стерев, прошейте уже наконец его с SW под Rm 718, потом уже делайте все остальное

Re: Nokia C6 RM-неизвестный, надо восстановить ПО

Цитата:

Сообщение от Shamsudin (Сообщение 8141)

Я исходил с того что он уже прошит 718

Re: rm-не известный, c6 на до завести

Вот попбробовал

Скрытый текст

Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.50.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104,

6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104,

600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0060 - 0000 0032 [Samsung LH28F800BG] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.50.0 revision: 3.0 size: 0xD4069
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104,

6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104,

600C192102031104
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
Original Imei: 35862704063145
Original Product code: 059C3B5
Bluetooth ID: 04A82AE06391
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Phone type: RM-718 (Nokia C6-01)
SW version: V 92_11w25.1 01-07-11 RM-718 (c) Nokia
Imei plain: 35862704063145-7
Battery voltage: 4536 mV, current: 57 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei net: 358627040631457
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Erasing PMM area 0 - 384, please WAIT ...
Section: 1 - got 31 key(s)
Section: 2 - got 1 key(s)
Section: 4 - got 2 key(s)
Section: 8 - got 10 key(s)
Section: 11 - got 4 key(s)
Section: 31 - got 1 key(s)
Section: 54 - got 1 key(s)
Section: 96 - got 1 key(s)
Section: 120 - got 4 key(s)
Section: 153 - got 6 key(s)
Section: 193 - got 4 key(s)
Section: 239 - got 2 key(s)
Section: 308 - got 7 key(s)
Section: 309 - got 7 key(s)
Section: 322 - got 1 key(s)
Section: 341 - got 3 key(s)
Section: 354 - got 1 key(s)
Section: 356 - got 1 key(s)
Section: 369 - got 1 key(s)
Completed in 37.500 s

CMT PAPUBKEYS HASH: C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
Updating CMT NPC ...OK
Updating CMT CCC ...OK
Updating CMT HWC ...OK
Prog.status for Asic CMT ...
NAND: OK

Phone type: RM-601 (Nokia C6-01)
SW version: V 92_11w25.1 01-07-11 RM-601 (c) Nokia
Imei plain: 35862704063145-7
Battery voltage: 4357 mV, current: 55 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei net: 358627040631457
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)

Phone type: RM-601 (Nokia C6-01)
SW version: V 92_11w25.1 01-07-11 RM-601 (c) Nokia
ApeCoreSw: 022.014

Using cached productData.
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
PRIVATE ID: DD055F05518B6F058BFC368AAB052644AC5ED11D
Updating SUPERDONGLE_KEY ...OK
Authenticating to SUPERDONGLE ...
SUPERDONGLE authorized :)!
Now you can write RFBB/PM data to the phone.
Done.
Phone authenticated to SUPERDONGLE already.
Phone authenticated to SUPERDONGLE already.
Writing PM from Node ...
Section: 1
- Key: 0, size 10 bytes written.
- Key: 1, size 94 bytes written.
- Key: 2, size 110 bytes written.
- Key: 4, size 10 bytes written.
- Key: 6, size 110 bytes written.
- Key: 7, size 450 bytes written.
- Key: 8, size 10 bytes written.
- Key: 13, size 110 bytes written.
- Key: 15, size 30 bytes written.
- Key: 16, size 30 bytes written.
- Key: 17, size 30 bytes written.
- Key: 18, size 30 bytes written.
- Key: 19, size 30 bytes written.
- Key: 22, size 24 bytes written.
- Key: 26, size 10 bytes written.
- Key: 27, size 36 bytes written.
- Key: 28, size 110 bytes written.
- Key: 29, size 10 bytes written.
- Key: 30, size 36 bytes written.
- Key: 31, size 24 bytes written.
- Key: 32, size 216 bytes written.
- Key: 33, size 36 bytes written.
- Key: 35, size 24 bytes written.
- Key: 36, size 24 bytes written.
- Key: 38, size 216 bytes written.
- Key: 39, size 36 bytes written.
- Key: 40, size 24 bytes written.
- Key: 41, size 216 bytes written.
- Key: 43, size 36 bytes written.
- Key: 44, size 216 bytes written.
- Key: 45, size 216 bytes written.
Section: 2
- Key: 0, size 2240 bytes written.
Section: 309
- Key: 0, size 4 bytes written.
- Key: 1, size 2 bytes written.
- Key: 2, size 12 bytes written.
- Key: 3, size 36 bytes written.
- Key: 4, size 12 bytes written.
- Key: 7, size 12 bytes written.
- Key: 17, size 12 bytes written.
Completed in 4.422 s

Phone type: RM-601 (Nokia C6-01)
SW version: V 92_11w25.1 01-07-11 RM-601 (c) Nokia
ApeCoreSw: 022.014
Imei plain: 35862704063145-7
Battery voltage: 4385 mV, current: 48 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei net: 358627040631457
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

что я делаю не правильно?

Re: rm-не известный, c6 на до завести

я тоже так делаю только, с этим телом не проходит

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8147)

я тоже так делаю только, с этим телом не проходит

Попробуй BEST с локальной авторизацией

Re: rm-не известный, c6 на до завести

Авторизация нет проходит

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8149)

Авторизация нет проходит

BEST пишит что надо делать. После local sx4 надо еще и нижние кнопки оплоуд нажать

Re: rm-не известный, c6 на до завести

Цитата:

Сообщение от sabotaj (Сообщение 8147)

я тоже так делаю только, с этим телом не проходит

Да, с новыми моделями так не получится.
В телефоне уже всё в порядке, кроме SECURITY_TEST failed!
Это исправляется с помощью SX4 авторизации и записи PM 1 и 309 полей.
Так же имеет смысл попробовать записать C6_RM-718_hwc+ccc_www.UO5OQ.com.rar , сделать SX4 авторизацию и записать C6-01_RM-718_PM_www.UO5OQ.com.rar

Re: rm-не известный, c6 на до завести

всё ок тама закрыта

Скрытый текст

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...-.
Wrong response to SD verify request
Retrying ...
Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 188.113.192.59
SUPERDONGLE authorized :)!
Now you can write RFBB/PM data to the phone.
Done.
Writing PM from Node ...
Section: 1
- Key: 0, size 10 bytes written.
- Key: 1, size 94 bytes written.
- Key: 2, size 110 bytes written.
- Key: 4, size 10 bytes written.
- Key: 6, size 110 bytes written.
- Key: 7, size 450 bytes written.
- Key: 8, size 10 bytes written.
- Key: 13, size 110 bytes written.
- Key: 15, size 30 bytes written.
- Key: 16, size 30 bytes written.
- Key: 17, size 30 bytes written.
- Key: 18, size 30 bytes written.
- Key: 19, size 30 bytes written.
- Key: 22, size 24 bytes written.
- Key: 26, size 10 bytes written.
- Key: 27, size 36 bytes written.
- Key: 28, size 110 bytes written.
- Key: 29, size 10 bytes written.
- Key: 30, size 36 bytes written.
- Key: 31, size 24 bytes written.
- Key: 32, size 216 bytes written.
- Key: 33, size 36 bytes written.
- Key: 35, size 24 bytes written.
- Key: 36, size 24 bytes written.
- Key: 38, size 216 bytes written.
- Key: 39, size 36 bytes written.
- Key: 40, size 24 bytes written.
- Key: 41, size 216 bytes written.
- Key: 43, size 36 bytes written.
- Key: 44, size 216 bytes written.
- Key: 45, size 216 bytes written.
Section: 309
- Key: 0, size 4 bytes written.
- Key: 1, size 2 bytes written.
- Key: 2, size 12 bytes written.
- Key: 3, size 36 bytes written.
- Key: 4, size 12 bytes written.
- Key: 7, size 12 bytes written.
- Key: 17, size 12 bytes written.
Completed in 3.547 s