| adamzoom |
14.05.2012 10:58 |
Nokia C5-03 не могу восстановить SIM LOCK с помощью RPL
чек
Код:
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 2060020F23FB55400713747B17143AA10706202D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.48.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.48.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 78E50A8766EC9CD99D190EEA9676987905B09588
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
инф
Код:
MCU Version V ICPR82_10w39.1
MCU Date 08-10-10
Product RM-697 (Nokia C5-03)
Manufacturer (c) Nokia
IMEI 3543490*****
Mastercode 16573****
IMEI Spare 3A454309****
IMEI SV 3345430964408005F1000000
PSN CDJ688687
Product Code 059C5H7
Module Code 0204650
Basic Product Code 059B215
PSD 0000000000000000
LPSN 0
WLAN MAC AC932F7FB473
APE SW V 10.0.031
APE Variant V 10.0.03110.0.03110.0.031
APE HW 256
APE ADSP 256
APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.
RETU 35
TAHVO 00
AHNE 11
HW 3000
RFIC |Vapaus_6.5 | Mikki_1.1
DSP ICPR82_10w39.1
Failed to read info -> Failed to read SP info
Security Analysis
Код:
Started Phone Security Analysis...
MCU Version V ICPR82_10w39.1
MCU Date 08-10-10
Product RM-697 (Nokia C5-03)
Manufacturer (c) Nokia
IMEI 3543490*****
Mastercode 1657*****
Reading Security Block...
Security block OK and saved to "RM-697_35434904604****_14.05.2012_135343.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --
Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.
-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"2060020F23FB55400713747B17143AA10706202D.C000662A" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
Код:
BB5 Unlock Started...
MCU Version V ICPR82_10w39.1
MCU Date 08-10-10
Product RM-697 (Nokia C5-03)
Manufacturer (c) Nokia
IMEI 35434904*****
Mastercode 16573*****
Warning: Failed to read SP Info, Assuming defaults
Simlock Server SIMLOCK SERVER
Simlock Key 0000000000000000
Simlock Profile
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Reading Security Block...
Security block OK and saved to "RM-697_35434904*****_14.05.2012_135601.SecurityBlock.PM"
"2060020F23FB55400713747B17143AA10706202D.C000662A" Exists, That is good...
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
BB5 Unlock Failed -> Simlock NOT ACCEPTED ! Maybe is SL3 phone?
пролил rpl, пролил pm с SX4, прошил 10v, делаю калькуляция rpl
за ведомо аппарат пришел с убитыми сертификатами
imei на шильдике отличается от imei в заказанной rpl
а симлоки битые |
