Selected model: HTC Surround (PD26100)
Connections ...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Found LAC ID: 202400E1, length IR = 4.
MI: Halting target, attempt 1.
Speed ​​JTAG: 6000 KHz.
Level VREF: 2.63 V
LAC: Qualcomm QSD8250
LAC ID: 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting ...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001 ... ok
MI: Server init.
MI: Received flash ID 0x0066ECBC.
MI: Flash geometry set.
MI: Recheking settings ... ok
Flags: 0000007F
Flash Type: Samsung 512Mb
Flash ID: 00EC66BC
Page Size: 4096 bytes
Block size: 64 pages (256 Kb)
Number of blocks: 2048
Total size: 512 Mb
MI: Setting configuration: 0xAAD401DA, 0x0044647E, 0x0000000D
MI: Configuration done.
HTC CID: CWS__001
IMEI: normal
Connection is successful
ECC mode enabled.
Open "F: \ PHONE \ SOFT ROBOCHI \ MEDUZA \ HTC \ T8788 \ HTC_SURROUND_FullFlash.mf \ HTC_SURROUND _FullFlash.mf" file ...
Writing BOOT section. Please Wait ... Completed
Record FIRMWARE section. Please Wait ... Completed
Disconnected