[Масуня]

1.) Модель телефона: Nokia C5-RM-645
2.) Внешнее проявление неисправности: При включении только срабатывает вибратор, телефон не запускается.
3.) После чего такое случилось: ставил последнюю прошивку фениксом

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 520994 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 147134 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING:  Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Product recovery failed!
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Product recovery failed!
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Product recovery failed!
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Initializing
Getting BB5 Phone Information from Update Server...
Unable to get PHONE_INFO for Algos. 0x84009427
Unable to get phone info from update server 0x8401F163
Unable to get phone information from Update Server
Initializing
Getting BB5 Phone Information from Update Server...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
Unable to get phone info from update server 0x8401F121
Unable to get phone information from Update Server
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product