Core : v1.61 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm645_061.005_prd.core.fpsx
CNT : rm645_ENO_v_0.NCP17_APEONLY.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0C80010427770E49C7E829DA1B8520F6D183CB60
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: phone is in flash mode
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm645_061.005_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_061.005_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 393 blocks
TIME : Write time : 00:00:14
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 11 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000010000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:15
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_10w34.2 15-10-10 RM-645 (c) Nokia
IMEI: 359345031316827
Ape Version: 061.005
Product code:
Checking...
SimLock status : SimLock Damaged!!!!!
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:00:43
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Set phone in Normal mode...
Restarting...
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0C80010427770E49C7E829DA1B8520F6D183CB60
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000010000000000000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!!
- > Do REPAIR SDD , Local SX4 if needed
CMLA Key status : CMLA key Not exist
SimLock status : SimLock Damaged!!!!!
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Will Write RPL keys now...
Check RPL file...
SimLock Data found!
SimLock key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Writing SimLock Key... Error!
Writing SimLock Data... Error!
SDD Key status : SDData Damaged!!!!!
SimLock status : SimLock Damaged!!!!!
Security status : Security is Ok
Done!