Connect phone on selected interface...
Core : v1.62 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-718_025.007_79.92_prd.core.fpsx
PPM : RM-718_025.007_08.01_Hebrew_79.92_prd.rofs2.fpsx
PPM2 : RM-718_025.007_00.01_79.92_prd.rofs3.fpsx
CNT : RM-718_025.007_01.01_79.92.uda.fpsx
APE : RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 26200217F7DC03442FDD9D537AC049A64CB54B81
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing RM-718_025.007_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04
Write : Processing RM-718_025.007_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 457 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [PPM]===
Erase : Processing RM-718_025.007_08.01_Hebrew_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-718_025.007_08.01_Hebrew_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 201 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-718_025.007_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-718_025.007_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [CNT]===
Erase : Processing RM-718_025.007_01.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04
Write : Processing RM-718_025.007_01.01_79.92.uda.fpsx
Total writen 530 blocks
TIME : Write time : 00:00:21
CNT Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
ADL: Close_Session
Content: 000300000000070000000700000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:55
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia C6-01
Software Info: V 92_11w37 14-09-11 RM-601 (c) Nokia
IMEI: 12345610654321?
Ape Version: 025.007
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:01:18
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... – Ok