Phone found!
Series 60 Device detected!
read info... - Ok
Will Write CCC/HWC keys now...
Using : RM-469.rpl
CCC Data found!
HWC Data found!
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1DC00018C78C0344833A0CB46AFA1B2CC85C33B0
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 85F252E351E225CAFC4DFBC8041EABD2823E3500
ADL: Preparing for write certificates...
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000010000000000000000
ADL: Reboot
All done, disconneting...
Done!
Elapsed: 00:00:06
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 353785044877180
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-469.pm
Operating mode is OK, no need change...
Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED
- > Try "Restore CCC/HWC" option, after SX4 again
Done!