card found: S/N @@@@:@@@@@
registered to: @@@@@
Connect phone on selected interface...
Connect phone on selected interface...
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 15A00010EBA40052FD9684133A5B353FC1AA4BC0
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.24.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.24.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15
CFL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01
- > USE "COLD FLASH" option in FlashSetting for revive device by USB!!!
CFL: Erase done
CFL: Close_Session
Content: 000300000000080000000800000000
CFL: Reboot
Phone disconected!
Connect phone on selected interface...
Core version : 1.29 Rev : 1.0
Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-588_50.0.001_prd.core.C00
PPM : RM-588_50.0.001_prd.rofs2.V05
PPM2 : RM-588_50.0.001_C01_prd.rofs3.fpsx
CNT : RM588_50.0.001_000_000_U001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 15A00010EBA40052FD9684133A5B353FC1AA4BC0
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.24.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.24.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)
CFL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing RM-588_50.0.001_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
Write : Processing RM-588_50.0.001_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:01:35
MCU Write done
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
===Flashing [PPM]===
Erase : Processing RM-588_50.0.001_prd.rofs2.V05
Erasing....
Erasing Data....
Erase area : 0x06FE0000 - 0x0915FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
Write : Processing RM-588_50.0.001_prd.rofs2.V05
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 109 blocks
TIME : Write time : 00:00:24
PPM Write done
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-588_50.0.001_C01_prd.rofs3.fpsx
Erasing....
Erasing Data....
Erase area : 0x09160000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
Write : Processing RM-588_50.0.001_C01_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 26 blocks
TIME : Write time : 00:00:05
PPM Write done
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
===Flashing [CNT]===
Erase : Processing RM588_50.0.001_000_000_U001.uda.fpsx
Erasing....
Erasing Data....
Erase area : 0x09E60000 - 0x0F47FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
Write : Processing RM588_50.0.001_000_000_U001.uda.fpsx
Total writen 75 blocks
TIME : Write time : 00:00:18
CNT Write done
CFL: Request programm status
NAND status : 00000008 / 00000008 / 00000000
CFL: Close_Session
Content: 000300000000080000000800000000
CFL: Reboot
Flashing done!
Total flash time : 00:02:25
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5230
Software Info: V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia
IMEI: 12345610654321?
Ape Version: V 50.0.001
Product code:
Checking...
SimLock status : SimLock Damaged!!!!!
Security status : Security Damaged!!!!!
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory
...
Error When resetting Product Tune
...
Error When resetting SW upgrade Default
...
AfterFlash operations done ;D
Done!
Elapsed: 00:02:40
Connect phone on selected interface...