[sher]

Не получатся у меня сделать SX4 почему

Лог SX4 авторизации и записи PM 1 и 309 полей

SX4 Authorization / SD Repair Procedure Started....
"13C00019CD810052751BD2A242C244D8E33DDFE6.C0003A5E" Exists, That is good...
MCU Version V ICPR72_09w18.4
MCU Date 14-10-09
Product RM-348 (Nokia N79)
Manufacturer (c) Nokia
IMEI 356044032081729
Mastercode 2724146425
Reading Security Block...
Security block OK and saved to "RM-348_356044032081729_30.10.2011_02249.SecurityBlock.PM"
SX4 Status: Authorized
[1,0] Written, Length: 114 bytes, Status: Not accepted, Code: 19
[1,1] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,2] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,4] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,5] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,6] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,8] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,13] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,15] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,16] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,18] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,20] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,22] Written, Length: 16 bytes, Status: Not accepted, Code: 19
[1,23] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,24] Written, Length: 84 bytes, Status: Not accepted, Code: 19
[1,25] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,26] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,27] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,28] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,29] Written, Length: 10 bytes, Status: Not accepted, Code: 19
[1,31] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,33] Written, Length: 36 bytes, Status: Not accepted, Code: 19
[1,34] Written, Length: 80 bytes, Status: Not accepted, Code: 19
[1,35] Written, Length: 16 bytes, Status: Not accepted, Code: 19
[1,37] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,39] Written, Length: 36 bytes, Status: Not accepted, Code: 19
[1,44] Written, Length: 182 bytes, Status: Not accepted, Code: 19
[1,45] Written, Length: 182 bytes, Status: Not accepted, Code: 19
[309,0] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[309,1] Written, Length: 2 bytes, Status: Not accepted, Code: 19
[309,2] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,4] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,5] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,7] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,8] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,17] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,22] Written, Length: 12 bytes, Status: Not accepted, Code: 19
Write PM Finished, Record written OK: 0, Record written NOT OK: 37

Вот ещё лог:

Started Phone Security Analysis...
MCU Version V ICPR72_09w18.4
MCU Date 14-10-09
Product RM-348 (Nokia N79)
Manufacturer (c) Nokia
IMEI 356044032081729
Mastercode 2724146425
Reading Security Block...
Security block OK and saved to "RM-348_356044032081729_30.10.2011_02614.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --

Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.

-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --


Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

Additionaly, Checking HWC/CCC Certs...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 13C00019CD810052751BD2A242C244D8E33DDFE6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"13C00019CD810052751BD2A242C244D8E33DDFE6.C0003A5E" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
SIMLOCK FOUND AND CHECKSUM OK! PASSED!
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!