MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0854FD6
Using device: HTI, FW ver: 00.24, SN: 00004CAC
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19045(08-10-2011), Library ver: 1.0.0.12923(10-10-2011)
Phone type: RM-718 (Nokia C6-01)
SW version: V 92PS1_10w46.9 01-03-11 RM-718 (c) Nokia
Using cached productData.
PUBLIC ID: 07E0010883D4584015B7EC123219A4D1B4207317
PRIVATE ID: 29CECD771AFEBD17544A5A20BB71442261465DA2
E-FUSE: FFFFFFFF
SEC ROM CRC: FFFFFFFF
Updating SUPERDONGLE_KEY ...OK
Authenticating to SUPERDONGLE ...
SUPERDONGLE authorized
!
Now you can write RFBB/PM data to the phone.
Done.
Phone authenticated to SUPERDONGLE already.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.8
Updating RFBB data ...
Writing section 1...
Writing section 309...
Done.
Phone type: RM-718 (Nokia C6-01)
SW version: V 92PS1_10w46.9 01-03-11 RM-718 (c) Nokia
Imei plain: 35xxxxxxxxxxxx-x
Battery voltage: 4492 mV, current: 6 mA
Language Pack:
- not available.
Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei net: 35xxxxxxxxxxxxx
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN