Из оборудования есть Mx-box, best, ufs, cyclone-box, mt-box, atf-box
При попытке считать SL3 LOG файл по F-bus один best в связке ufs чекает но за 10 попиткой....решта боксов по F-bus не чекают
Кто может дайте совет так как дело строчное.
По usb конектить циклон но лог не вичитивает - пишет что лог по юсб можно считать только с нових протоколов BB5
лог при попитке конекта
UFS S/N 8039 boot - Ok
Connect phone on selected interface...
Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok
No answer from phone...
- > 1. Check cable/connection, try again
- > 2. Maybe HW fault or bad cable
за 10 попиткой аж на 15кОМ:
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Setting FlashMode
FlashMode set Ok
No answer from phone...
- > 1. Check cable/connection, try again
- > 2. Maybe HW fault or bad cable
при нажатии кнопки Create file for LBF^
Phone found!
Series 40 Device detected!
read info... - Ok
Phone Imei: 353402040812266
Checking locks...
Conf key : 8000000000000000
Provider key : 2600300000000000
Provider : IDEA Centertel;Poland
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1
LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
PA_SL3 (15 digit) phone detected...
Setting FlashMode
FlashMode set Ok
No answer from phone...
- > 1. Check cable/connection, try again
- > 2. Maybe HW fault or bad cable
Error fetching data...
Can't read Unique data!
Error...!