[UO5OQ]

Сообщение от CAIIIA

а вот лог прошивки циклоном через ЮСБ

Скрытый текст

Processing RM-348_32.001_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 146000112A650052CF5A1A498A81FA9F9245546F
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-348_32.001_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0A95FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.797s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 95.125s
Flashing Speed: 9132,89 kBit/S
Processing RM-348_32.001_prd.core.fpsx (APE)...
Processing RM-348_32.001_005_prd.language.fpsx (CMT)...
RM-348_32.001_005_prd.language.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
Started group flash erase
EraseArea[0,CMT]: 0x08260000-0x09F5FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.141s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 21.797s
Flashing Speed: 9257,95 kBit/S
Processing RM-348_32.001_005_prd.language.fpsx (APE)...
Processing RM-348_32.001_53.1_prd.customer.fpsx (CMT)...
RM-348_32.001_53.1_prd.customer.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
Started group flash erase
EraseArea[0,CMT]: 0x09F60000-0x0A95FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.62s
Flashing Speed: 1052,13 kBit/S
Processing RM-348_32.001_53.1_prd.customer.fpsx (APE)...
Processing RM-348_32.001_003_000_U001.uda.fpsx (CMT)...
RM-348_32.001_003_000_U001.uda.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
Started group flash erase
EraseArea[0,CMT]: 0x0A960000-0x0F71FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.360s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 16.32s
Flashing Speed: 8360,33 kBit/S
Processing RM-348_32.001_003_000_U001.uda.fpsx (APE)...
Processing vivien_eno_imaker_ape_only.fpsx (CMT)...
vivien_eno_imaker_ape_only.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
PAPUBKEYS Hash for CMT: B2075F4B793BB9017C8C0097C783C543F2A6A303
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.15s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
Programming Status OK!
All blocks written OK! Time taken 2.375s
Flashing Speed: 9144,69 kBit/S
Processing vivien_eno_imaker_ape_only.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia N85 USB Phonet]: Port opened OK!
[Nokia N85 USB Phonet]: Port opened OK!
[Nokia N85 USB Phonet]: Port opened OK!
[Nokia N85 USB Phonet]: Port opened OK!
[Nokia N85 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia N85 USB Phonet]: Port opened OK!
MCU Version V ICPR72_09w18.4
MCU Date 14-10-09
Product RM-348 (Nokia N79)
Manufacturer (c) Nokia
IMEI 3563870хххххххх
Mastercode 737507162
IMEI Spare 3A658ххххххххххххх
IMEI SV 3365830782ххххххххххх
PSN KTA567401
Product Code 0565728
Basic Product Code 0561379
PSD 0000000000000000
LPSN 0
WLAN MAC 0025CFD6758A
APE SW 32.001
APE Variant 32.00132.001.005.132.001.53.1
APE Test eno_version
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 6100
RFIC 17141715
DSP astro_ICPR72_09w17
Failed to read info -> Failed to read SP info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

интересно а какого хрена он N85 USB Phonet?

Думаю это или глюк Cyclone или скорее всего путаница в названиях Nokia USB драйверов в реестре.
Врядли это относится к проблеме телефона.