Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0F400005B84501527C45C1AB06C2E7AB28C81CD0
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 505A5C85580A6322C103BFE4E67B73EF478E791C
CFL : RAPIDO Mode - FLASH CRT (NPC/CCC/HWC...) can't be readed
CFL: Close_Session
Content: 000300000000030000000300000000
CFL: Reboot
Wait, reconneting...
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
CRT308 Backup Created
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\12345610654321x_SIM.rpl
All done, Disconnecting
Elapsed: 00:00:13
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia C6-00
Software ver : V ICPR72_11w04 28-01-11 RM-612 (c) Nokia
IMEI : 12345610654321?
Ape Ver : v 40.0.021
APE Var : v 40.0.02140.0.021.19.0140.0.021.C01.01
APE ADSP: 256
DSP Ver : 10w43
APE Test: 0.018
PPM :
CNT : v 40.0.021
Product SN : CPL648139
Product code : 0596311
Base Prd.code: 0588602
Module code : 0204394
Long Prod.SN : 0
Hardware info=======
HWID : 0900
Retu : 16
Tahvo : 22
Batery: 3630 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 11 F5
Unable to read Lock table...
IMEI DAMAGED!!! CRT308 save skipped...
SDD key status : Ok
SimLock status : Ok
Security status : Damaged!!!!!
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Local SX4 procedure started...
- > IMEI Validation : IMEI Damaged!!!!
- > SECURITY Info will be wrong!
- > RESTORE NPC FIRST
Phone Imei: 12345610654321?
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-612.pm
Operating mode is OK, no need change...
Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Record 22 write - Ok
Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED
- > Try different PM files or "Restore CCC/HWC" option
Done!