 |
 |
 |
|
|
|
|||||||
| Расчёт NCK кода из LOG файла Nokia SL3 для любого HASH Новости, поддержка пользователей. |
 |
|
|
Опции темы | Поиск в этой теме |
14.03.2012, 16:45
|
#1 |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16  |
[РЕШЕНО] Nokia X3-02 NCK "Неверный код"
13.03.12 17:59 заказал рассчет из лог файла коды не подходят, что делать?
|
|
|
14.03.2012, 16:49
|
#2 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,426
Вес репутации: 10   |
Re: X3-02 NCK "Неверный код"
Цитата:
- Лог чтения INFO из телефона. - Лог чтения SL3 LOG файла из телефона.
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
14.03.2012, 16:55
|
#3 | |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16 |
Re: X3-02 NCK "Неверный код"
Цитата:
|
|
|
|
|
14.03.2012, 16:59
|
#4 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,426
Вес репутации: 10 |
Re: X3-02 NCK "Неверный код"
Цитата:
Что бы понять в чём дело, нужны именно логи программы.
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
14.03.2012, 17:03
|
#5 |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16 |
Re: X3-02 NCK "Неверный код"
MODEL: NOKIA X3-02 (PHONE)
SW: V 07.15 07-10-11 RM-639 (C) NOKIA IMEI: 353764046484006 P.CODE: 05920 LIFE TIMER: 00000000 <> 000000:00 ST_SIM_LOCK_TEST: PASSED ST_SECURITY_TEST: PASSED ST_SUPERDONGLE_TEST: PASSED VERSION: SIMLOCK SERVER PROVIDER KEY: 8000000000000000 CONFIG KEY: 2080100000000000 PROVIDER: ORANGE + FRANCE TELECOM ITINERIS;FRANCE KEY CODE COUNT: 0 , FBUS CODE COUNT: 0 |
|
|
|
14.03.2012, 17:11
|
#6 |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16 |
Re: X3-02 NCK "Неверный код"
Скрытый текстNokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.11540 Handling device: [Cyclone Team], [Cyclone Box] Initializing box... v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number: 2009, wk40 Initializing security card... Card Serial Number: D Card Firmware Revision: 0109 Card is activated Box is activated Super DCT4 Activation: TRUE Initializing FBUS... All initialized - Ready to work Processing pre flash tasks... Backing up RPL... RPL Creation started... Processing CMT Part... Phone not detected at USB -> Timeout, no any compatible USB device detected. Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00001051 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 23000212F8A40344E10A4CD3574E0B3C577597A6 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C APE Subsystem Not Found Storing NPC... Storing CCC... Storing HWC... CMT VARIANT Not Found Restarting MCU... RPL Saved OK RPL backup thread finished, continuing... Backing up simlock... [Generic Phone]: Port opened OK! MCU Version V 05.60 MCU Date 06-10-10 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 RM-639_353764046484006_06.03.2012_212935.SLBackup.PM Backup simlock thread finished, continuing... Pre flash tasks finished, continuing... Processing rm639__07.15.mcusw (CMT)... Booting CMT... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00001051 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 23000212F8A40344E10A4CD3574E0B3C577597A6 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! rm639__07.15.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6 Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C Sending Certificates... Certificates OK Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND EraseArea[0,CMT]: 0x000A0000-0x0041FFFF, ONENAND EraseArea[0,CMT]: 0x00420000-0x0069FFFF, ONENAND EraseArea[0,CMT]: 0x006A0000-0x006DFFFF, ONENAND EraseArea[0,CMT]: 0x006E0000-0x0123FFFF, ONENAND EraseArea[0,CMT]: 0x02060000-0x020BFFFF, ONENAND EraseArea[0,CMT]: 0x02CC0000-0x0333FFFF, ONENAND EraseArea[0,CMT]: 0x07540000-0x07B3FFFF, ONENAND EraseArea[0,CMT]: 0x01240000-0x0205FFFF, ONENAND Erase Partition (CMT) Erase Partition (CMT) Erase Partition (CMT) Waiting 320s for erasure finish... Erase taken 0.563s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT ADA Certificate... Writing CMT KEYS Certificate... Writing CMT PRIMAPP Certificate... Writing CMT PASUBTOC Certificate... Writing CMT PAPUBKEYS Certificate... Writing CMT RAP3NAND Certificate... Writing CMT UPDAPP Certificate... Writing CMT LDSP Certificate... Writing CMT DSP0 Certificate... Writing CMT MCUSW Certificate... Writing CMT MCUSW1 Certificate... Writing CMT GENIO_INIT Certificate... Writing CMT ISA+DYNSW Certificate... Programming Status OK! All blocks written OK! Time taken 11.828s Flashing Speed: 21714,12 kBit/S Processing rm639__07.15.mcusw (APE)... Processing rm639__07.15.ppm_e (CMT)... rm639__07.15.ppm_e, Type: Flash Image, Algo: BB5, XSR 1.6 PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x020C0000-0x02CBFFFF, ONENAND Waiting 320s for erasure finish... Erase taken 0.109s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Programming Status OK! All blocks written OK! Time taken 2.875s Flashing Speed: 22287,77 kBit/S Processing rm639__07.15.ppm_e (APE)... Processing rm639__07.15.image_e_0598110_010 (CMT)... rm639__07.15.image_e_0598110_010, Type: Flash Image, Algo: BB5, XSR 1.6 PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x03340000-0x0753FFFF, ONENAND Erase Partition (CMT) Waiting 320s for erasure finish... Erase taken 1.0s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Programming Status OK! All blocks written OK! Time taken 11.469s Flashing Speed: 22683,65 kBit/S Processing rm639__07.15.image_e_0598110_010 (APE)... Restarting MCU... All images processed OK! Processing post flash tasks... Setting Factory Defaults... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! [Nokia X3 Touch and Type USB Phonet]: Port opened OK! [Nokia X3 Touch and Type USB Phonet]: Port opened OK! [Nokia X3 Touch and Type USB Phonet]: Port opened OK! [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Factory defaults OK Reading info... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! MCU Version V 07.15 MCU Date 07-10-11 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 IMEI Spare 3A35670464840400 IMEI SV 3335670464840440F7000000 PPM V 07.15, 07-10-11, RM-639, (c) Nokia , E CNT Content: e_0598110, V 07.15, 20-10-11, RM-639, (c) Nokia PSN CNL996228 Product Code 059D2W0 Module Code 0204600 Basic Product Code 0593642 PSD 0000000000000000 LPSN 0 WLAN MAC C8DF7C6F332C RETU 51 TAHVO 00 AHNE 11 HW 1002 RFIC |Alli_4.3.4 DSP 92_PM2_7.14 LCD TPO BT 4217-v924 Simlock Server SIMLOCK SERVER Simlock Key 2080100000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 3 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 20801F Read info thread finished, continuing... Post flash tasks finished! Flashing successfully finished! Лог прошивки |
|
|
|
14.03.2012, 17:12
|
#7 |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,426
Вес репутации: 10 |
Re: X3-02 NCK "Неверный код"
По логу этой программы нельзя определить причину.
Нужны логи от бокса который может читать SL3 LOG файл из этой модели. Лог чтения информации из телефона и лог чтения SL3 LOG файла.
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
14.03.2012, 17:14
|
#8 |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16 |
Re: X3-02 NCK "Неверный код"
Скрытый текст[Nokia X3 Touch and Type USB Phonet]: Port opened OK! MCU Version V 05.60 MCU Date 06-10-10 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 IMEI Spare 3A35670464840400 IMEI SV 3335670464840410F9000000 PPM V 05.60, 06-10-10, RM-639, (c) Nokia , OC CNT Content: Orange FR sl, V 05.60, 06-10-10, RM-639, (c) Nokia PSN CNL996228 Product Code 059D2W0 Module Code 0204600 Basic Product Code 0593642 PSD 0000000000000000 LPSN 0 WLAN MAC C8DF7C6F332C RETU 51 TAHVO 00 AHNE 11 HW 1002 RFIC |Alli_4.3.4 DSP 92_MP2.2_5.58 LCD TPO BT 4217-v529 Simlock Server SIMLOCK SERVER Simlock Key 2080100000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 3 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 20801F Auto Selecting Flash Files on User Request... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Product Code: 059D2W0 Scanning avaiable products... Processing C:\Program Files\Nokia\Phoenix\Products\... Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\... Found 40 products, Filtering DCT4 Products - wait... 2 Products left after filtering. Ready. Scanning avaiable products... Processing C:\Program Files\Nokia\Phoenix\Products\... Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\... Found 40 products, Filtering BB5 Products - wait... 9 Products left after filtering. Ready. No Flash Datapackage installed for this Phone! Started Phone Security Analysis... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! MCU Version V 05.60 MCU Date 06-10-10 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 Reading Security Block... "RM-639_353764046484006_06.03.2012_203731.SecurityBlock.PM" Step 1 : Testing SIMLOCK SIMLOCK SEFLTEST PASSED OK! Step 2 : Testing SECURITY SECURITY SEFLTEST PASSED OK! Step 3 : Analyzing Security Block "23000212F8A40344E10A4CD3574E0B3C577597A6.C0003674" Exists, That is good... Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking ECC KEYS... ECC KEYS FOUND AND CHECKSUM OK! PASSED! Checking DIV KEYS... DIV KEYS FOUND AND CHECKSUM OK! PASSED! Analyze finished! [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Security Code 12345 Attempts 00 Booting CMT... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00001051 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 23000212F8A40344E10A4CD3574E0B3C577597A6 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C APE Boot skipped on user request Restarting MCU... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Booting CMT... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00001051 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 23000212F8A40344E10A4CD3574E0B3C577597A6 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C APE Subsystem Not Found CMT NPC Ok CMT HWC Ok CMT CCC Ok CMT R&D Ok CMT VARIANT Not Found CMT PAPUBKEYS Ok CMT KEYS Ok Restarting MCU... Read all certificates finished Reading SL3 LOG File... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! MCU Version V 05.60 MCU Date 06-10-10 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found "23000212F8A40344E10A4CD3574E0B3C577597A6.C0003674" Exists, That is good... Success! Reading SL3 LOG File... [Nokia X3 Touch and Type USB Phonet]: Port opened OK! MCU Version V 05.60 MCU Date 06-10-10 Product RM-639 (Nokia X3-02) Manufacturer (c) Nokia IMEI 353764046484006 Mastercode 63261336 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found "23000212F8A40344E10A4CD3574E0B3C577597A6.C0003674" Exists, That is good... Success! |
|
|
|
14.03.2012, 17:22
|
#9 |
|
Junior Member
Регистрация: 14.03.2012
Сообщений: 14
Вес репутации: 16 |
Re: X3-02 NCK "Неверный код"
Пробовал и с клавы и программкой с форума не прокатывает
Все спасибо, программа неправильно коды посылала с клавиатуры. После сброса попыток всё получилось. Телефон успешно раскодирован! |
|
|
|
14.03.2012, 17:25
|
#10 | ||
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,426
Вес репутации: 10 |
Цитата:
Цитата:
Например BEST-ом попробуйте. Да и счётчик сначала сбросить надо. Обычно подходит NCK код 7-го уровня, но иногда 1-го. Пробовали оба?
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
||
|
|
| Пользователь сказал cпасибо: | laicize (14.03.2012) |
