Nokia c3-01.5, RM-776 Contact Service после подтверждения ВКЛючения

[ivan_ashurov]

Nokia c3-01.5, RM-776
после подтверждения "Contact serveсe"


Core : v1.48 , FlashEngine : v1.7

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm776__07.32.mcusw
PPM : rm776__07.32.ppm_i
CNT : rm776__07.32.image_i_059H3W5_004
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357400046020534
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\357400046020534_CR T_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm776__07.32.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm776__07.32.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 262 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [PPM]===
Erase : Processing rm776__07.32.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm776__07.32.ppm_i
Total writen 62 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [CNT]===
Erase : Processing rm776__07.32.image_i_059H3W5_004
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm776__07.32.image_i_059H3W5_004
Total writen 331 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C3-01.5
Software Info: V 07.32 08-12-11 RM-776 (c) Nokia
IMEI: 357400046020534
PPM version : V 07.32 08-12-11 RM-776 (c) Nokia I
Product code: 059J128
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory :( ...
Error When setting User Data defaults :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
AfterFlash operations done ;D
Done!

Elapsed: 00:00:36
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Set phone in Normal mode...
Restarting...

Done!
Connect phone on selected interface...


Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 357400046020534
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Wait, reconneting...

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\357400046020534_CR T_2nd.rpl

All done, Disconnecting

Elapsed: 00:00:11
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok

-> Cert Earse can be done only in DEAD mode, Check DEAD mode, and connect powered OFF phone

User ACCEPTED FULL ERASE
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02

Seek file for this phone....

- > RPL backup found, but not full (NPC/SimLock absent) !!!
- > Make RPL read from Alive/Dead , Make FlashRead
- > Or check "Skip Bak.Chk."
Stopping operation...

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
Try again...
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
Try again...
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228
ADL: Preparing for erase certificates...

Erase NPC... Ok
Erase CCC... Ok
Erase HWC... Ok

ADL: Erase Flash certs done! :)

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Done!

Phone disconected!

Connect phone on selected interface...

Core : v1.48 , FlashEngine : v1.7

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm776__07.32.mcusw
PPM : rm776__07.32.ppm_i
CNT : rm776__07.32.image_i_059H3W5_004
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

===Flashing [MCU]===
Erase : Processing rm776__07.32.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm776__07.32.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 262 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [PPM]===
Erase : Processing rm776__07.32.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm776__07.32.ppm_i
Total writen 62 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [CNT]===
Erase : Processing rm776__07.32.image_i_059H3W5_004
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm776__07.32.image_i_059H3W5_004
Total writen 331 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C3-01.5
Software Info: V 07.32 08-12-11 RM-776 (c) Nokia
IMEI: 12345610654321?
PPM version : V 07.32 08-12-11 RM-776 (c) Nokia I
Product code: 059J128
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory :( ...
Error When setting User Data defaults :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
AfterFlash operations done ;D
Done!

Elapsed: 00:00:38
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Set phone in Normal mode...
Restarting...

Done!
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok


Seek file for this phone....
-----------------------------
- > RPL file found for this phone!
- > NPC Found in : 357400046020534_CRT.rpl
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-----------------------------

Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

-> No any Flex keys selected or found, skip flex part

Connect phone on selected interface...

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Set phone in Normal mode...
Restarting...

Done!
Connect phone on selected interface...

[kiv6666]

SimLock status : SimLock Damaged!!!! Тут без полного RPL необойтись.Но учитывая что у тебя есть бэкап PM можно попробывать БЕСПЛАТНЫЕ Repair RPL для участников www.UO5OQ.com/forum (http://www.uo5oq.com/forum/showthread.php?t=822)

[zorgy_1979]

Добавлю к словам уважаемого kiv6666. Перед любой прошивой обязателен не только бакап rpl но и бакап полного pm. Не раз этим спасал свой карман от попадаия на рпл. Слить пм дело минуты, тем более по усб. Просто надо нажать кнопку. Все просто, иногда бест отказывается прописывать симлок из бакапа рпл или оказывается что симлок слит крво. Все восстанавливается проливкой пм. Причем если пм слит бестом то обращеие к самому Павлу не обязательно. Бест и так все восстанавливает.