 |
 |
 |
|
|
|
|||||||
| Nokia Программный и Аппаратный ремонт телефонов Nokia |
 |
|
|
Опции темы | Поиск в этой теме |
14.08.2012, 16:55
|
#1 |
|
Elite Member
Регистрация: 08.07.2011
Сообщений: 565
Вес репутации: 374   |
Nokia c3-01.5, RM-776 Contact Service после подтверждения ВКЛючения
Nokia c3-01.5, RM-776
после подтверждения "Contact serveсe" Лог стирания и записи прошикиCore : v1.48 , FlashEngine : v1.7
Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm776__07.32.mcusw PPM : rm776__07.32.ppm_i CNT : rm776__07.32.image_i_059H3W5_004 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done!  TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 357400046020534 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\357400046020534_CRT_2nd.rpl ===Flashing [MCU]=== Erase : Processing rm776__07.32.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm776__07.32.mcusw CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 262 blocks TIME : Write time : 00:00:05 MCU Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [PPM]=== Erase : Processing rm776__07.32.ppm_i Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm776__07.32.ppm_i Total writen 62 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [CNT]=== Erase : Processing rm776__07.32.image_i_059H3W5_004 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:02 Write : Processing rm776__07.32.image_i_059H3W5_004 Total writen 331 blocks TIME : Write time : 00:00:04 CNT Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ADL: Close_Session Content: 000300000000060000000600000000 ADL: Reboot Flashing done! Total flash time : 00:00:14 Reboot phone now... Reading Phone Info.... Connected phone - Nokia C3-01.5 Software Info: V 07.32 08-12-11 RM-776 (c) Nokia IMEI: 357400046020534 PPM version : V 07.32 08-12-11 RM-776 (c) Nokia I Product code: 059J128 Checking... SimLock status : SimLock Damaged!!!!!  Security status : Security is Ok Read Info Done! Settings After Flash Defaults... Error When resetting FullFactory ...Error When setting User Data defaults ... Error When resetting Product Tune ...Error When resetting SW upgrade Default ...AfterFlash operations done ;D Done! Elapsed: 00:00:36 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Connect phone on selected interface... Backup Certificates now... Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228 ADL: Reading certificates... Reading NPC certificate... IMEI : 357400046020534 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! ADL: Reading certificates done! ADL: Close_Session Content: 000300000000060000000600000000 ADL: Reboot Wait, reconneting... NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\357400046020534_CRT_2nd.rpl All done, Disconnecting Elapsed: 00:00:11 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok -> Cert Earse can be done only in DEAD mode, Check DEAD mode, and connect powered OFF phone User ACCEPTED FULL ERASE Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Seek file for this phone.... - > RPL backup found, but not full (NPC/SimLock absent) !!! - > Make RPL read from Alive/Dead , Make FlashRead - > Or check "Skip Bak.Chk." Stopping operation... Connect phone on selected interface... Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : Verify Error Try again... -> Error answer from BootRom Looks like ASIC not supported, or HW failure Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : Verify Error Try again... -> Error answer from BootRom Looks like ASIC not supported, or HW failure Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228 ADL: Preparing for erase certificates... Erase NPC... Ok Erase CCC... Ok Erase HWC... Ok ADL: Erase Flash certs done! ADL: Close_Session Content: 000300000000060000000600000000 ADL: Reboot Done! Phone disconected! Connect phone on selected interface... Core : v1.48 , FlashEngine : v1.7 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm776__07.32.mcusw PPM : rm776__07.32.ppm_i CNT : rm776__07.32.image_i_059H3W5_004 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 000000000000000 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! ===Flashing [MCU]=== Erase : Processing rm776__07.32.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm776__07.32.mcusw CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 262 blocks TIME : Write time : 00:00:05 MCU Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [PPM]=== Erase : Processing rm776__07.32.ppm_i Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm776__07.32.ppm_i Total writen 62 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [CNT]=== Erase : Processing rm776__07.32.image_i_059H3W5_004 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:02 Write : Processing rm776__07.32.image_i_059H3W5_004 Total writen 331 blocks TIME : Write time : 00:00:04 CNT Write done ADL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ADL: Close_Session Content: 000300000000060000000600000000 ADL: Reboot Flashing done! Total flash time : 00:00:14 Reboot phone now... Reading Phone Info.... Connected phone - Nokia C3-01.5 Software Info: V 07.32 08-12-11 RM-776 (c) Nokia IMEI: 12345610654321? PPM version : V 07.32 08-12-11 RM-776 (c) Nokia I Product code: 059J128 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... Error When resetting FullFactory ...Error When setting User Data defaults ... Error When resetting Product Tune ...Error When resetting SW upgrade Default ...AfterFlash operations done ;D Done! Elapsed: 00:00:38 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Will Write RPL keys now... Check RPL file... NPC Data found! (CMT) CCC Data found! (CMT) HWC Data found! (CMT) -> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Seek file for this phone.... ----------------------------- - > RPL file found for this phone! - > NPC Found in : 357400046020534_CRT.rpl Check RPL file... NPC Data found! (CMT) CCC Data found! (CMT) HWC Data found! (CMT) ----------------------------- Reboot.... Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 86230000FFFB3C40D5CF10E9C383D91391EE390C ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 6F6CDB1D5FE1E3B4B66C4581E4B2A013F299F228 ADL: Preparing for write certificates... Erase NPC... Ok Writing NPC... Ok Erase CCC... Ok Writing CCC... Ok Erase HWC... Ok Writing HWC... Ok ADL: Writing Flash certs done! ADL: Close_Session Content: 000300000000060000000600000000 ADL: Reboot -> No any Flex keys selected or found, skip flex part Connect phone on selected interface... Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Connect phone on selected interface... |
|
|
|
14.08.2012, 18:18
|
#2 |
|
Moderator
Регистрация: 15.11.2011
Адрес: Haifa IL
Сообщений: 1,369
Вес репутации: 696 |
Re: Nokia c3-01.5, RM-776 Contact Service после подтверждения ВКЛючения
SimLock status : SimLock Damaged!!!! Тут без полного RPL необойтись.Но учитывая что у тебя есть бэкап PM можно попробывать БЕСПЛАТНЫЕ Repair RPL для участников www.UO5OQ.com/forum
|
|
|
|
| Пользователь сказал cпасибо: | zorgy_1979 (15.08.2012) |
|
15.08.2012, 03:50
|
#3 |
|
Administrator
Регистрация: 16.05.2012
Адрес: Россия, Новосибирск
Сообщений: 1,706
Вес репутации: 10  |
Re: Nokia c3-01.5, RM-776 Contact Service после подтверждения ВКЛючения
Добавлю к словам уважаемого kiv6666. Перед любой прошивой обязателен не только бакап rpl но и бакап полного pm. Не раз этим спасал свой карман от попадаия на рпл. Слить пм дело минуты, тем более по усб. Просто надо нажать кнопку. Все просто, иногда бест отказывается прописывать симлок из бакапа рпл или оказывается что симлок слит крво. Все восстанавливается проливкой пм. Причем если пм слит бестом то обращеие к самому Павлу не обязательно. Бест и так все восстанавливает.
|
|
|
|
